Fairchild Club Forum

'Hi Steve. I will post them to the group

Regards

Stuart

-----Original Message-----
From: fairchildclub@yahoogroups.com [mailto:fairchildclub@yahoogroups.com]
On Behalf Of Steve Link
Sent: 30 November 2010 07:39 PM
To: fairchildclub@yahoogroups.com
Subject: RE: [fairchildclub] Fairchild Exhaust

Stuart, could you please include me on an e-mail copy of your drawings as
well? Thanks, Steve.



From: fairchildclub@yahoogroups.com [mailto:fairchildclub@yahoogroups.com]
On Behalf Of Stuart Burgess
Sent: Tuesday, November 30, 2010 12:20 AM
To: fairchildclub@yahoogroups.com
Subject: RE: [fairchildclub] Fairchild Exhaust





Hi Bill

I have a few single stacks on the engine that will go onto my F24 project
when it is done. I am contemplating whether to fit singles or two 3 into 1
branches which I think is more common, although the look and the sound of
the singles tempt me. Bill if you need dimensions of a single stack to have
them remade, let me know and I will draw one up for you.

Cheers

Stuart

-----Original Message-----
From: fairchildclub@yahoogroups.com
[mailto:fairchildclub@yahoogroups.com
]
On Behalf Of Bill
Sent: 30 November 2010 05:35 AM
To: fairchildclub@yahoogroups.com
Subject: [fairchildclub] Fairchild Exhaust

Has anyone installed single-exhaust stacks on their Ranger 6-440 engines,
specifically on Fairchild 24R? 337?
Bill C.

------------------------------------

Yahoo! Groups Links





[Non-text portions of this message have been removed]



------------------------------------

Yahoo! Groups Links'

'Hi Bill

Due to the interest, I will post drawings of the singles to the group as
soon as I have them done. Fortunately my airey is not type certified and as
such AI have a bit more freedom.

Regards

Stuart

-----Original Message-----
From: fairchildclub@yahoogroups.com [mailto:fairchildclub@yahoogroups.com]
On Behalf Of William Creighton
Sent: 30 November 2010 11:41 PM
To: fairchildclub@yahoogroups.com
Subject: RE: [fairchildclub] Fairchild Exhaust


Stuart,

I'm replacing the stamped ss three-into-one exhaust setup on my Fairchild,
which experienced catastrophic failure while inroute to a antique aircraft
fly-in here in Texas. I lucked out in finding a set of 3-1 cs tubular
headers off a 'parts' Ranger at the fly-in FBO's hanger! Picture attached -
hope you can see it...

I really like the sound and looks of individual exhaust stacks. However,
without an existing 337, don't think the aesthetics are worth the hassle.
Cost/fit-up are certainly simplified over a 3-1 or 6-1 setup, but we've got
certified aircraft, limiting our available options. The photos Airy
forwarded of single stacks looks cool! Kindly send me the dimensions of
your setup so that I can evaluate that option further on my spare engine.

AMI (MN) will hopefully be fabbing my new ss tubular 3-1's this week. Need
to get buttoned back up and in the air! Hoping I won't have to do too much
'adjustment' to get the flanges lined up with the exhaust studs...

Regards,
Bill C.



To: fairchildclub@yahoogroups.com
From: burgess@mweb.co.za
Date: Tue, 30 Nov 2010 08:20:10 +0200
Subject: RE: [fairchildclub] Fairchild Exhaust





Hi Bill

I have a few single stacks on the engine that will go onto my F24 project
when it is done. I am contemplating whether to fit singles or two 3 into 1
branches which I think is more common, although the look and the sound of
the singles tempt me. Bill if you need dimensions of a single stack to have
them remade, let me know and I will draw one up for you.

Cheers

Stuart

-----Original Message-----
From: fairchildclub@yahoogroups.com [mailto:fairchildclub@yahoogroups.com]
On Behalf Of Bill
Sent: 30 November 2010 05:35 AM
To: fairchildclub@yahoogroups.com
Subject: [fairchildclub] Fairchild Exhaust

Has anyone installed single-exhaust stacks on their Ranger 6-440 engines,
specifically on Fairchild 24R? 337?
Bill C.

------------------------------------

Yahoo! Groups Links






[Non-text portions of this message have been removed]



------------------------------------

Yahoo! Groups Links'