Fairchild Club Forum

'Oh I didn’t realize you were on this board! Very good, yes take care of yourselves and we will hook up with you when all is well.
Thanks!

John Armbrust

On Oct 27, 2017, at 19:21, Kevin Trumpore ketrumpore@yahoo.com [fairchildclub] wrote:

 
Like Jamie stated both dad and I have health issues. I will not be doing any more engine mount work until after the first of the year. RegardsKevin

Sent from my iPhone
On Oct 27, 2017, at 6:57 PM, John Armbrust krossbow@comcast.net [fairchildclub] wrote:

 
Roger. I’ve put in a couple phone calls but so far no call back. I will keep trying. When I do reach them I will indicate that a number of folks are interested.

John Armbrust
On Oct 27, 2017, at 17:50, Tj kottre@yahoo.com [fairchildclub] wrote:

 
Looks like I will need a set as well. TomN89J 

Sent from my iPhone
On Oct 26, 2017, at 3:57 AM, Matthew & Patricia Banks flyingbanks@yahoo.com [fairchildclub] wrote:

 
John ...Let me know how you make out on the mounts... I may want to get in line for a set as well. 
MattN4263S

From: "jamietreat jamietreat@q.com [fairchildclub]"
To: fairchildclub@yahoogroups.com
Sent: Wednesday, October 25, 2017 9:08 AM
Subject: Re: [fairchildclub] Jacobs 755 Serv-Aero mount isolation




908-459-5858
Southland manuf in NJ  Larry Trumpore and son. Both have health issues. Keep calling.
Sent via the Samsung Galaxy S7, an AT&T 4G LTE smartphone
-------- Original message --------From: "John Armbrust krossbow@comcast.net [fairchildclub]" Date: 10/24/17 10:26 AM (GMT-06:00) To: fairchildclub@yahoogroups.com Subject: Re: [fairchildclub] Jacobs 755 Serv-Aero mount isolation
  Jamie,
Which Southland Manufacturing? Do you know what city they are in?

John Armbrust
On Oct 24, 2017, at 08:50, jamietreat jamietreat@q.com [fairchildclub] wrote:

  Southland manuf has the bushings


Sent via the Samsung Galaxy S7, an AT&T 4G LTE smartphone
-------- Original message --------From: "Matthew & Patricia Banks flyingbanks@yahoo.com [fairchildclub]" Date: 10/24/17 6:38 AM (GMT-06:00) To: fairchildclub@yahoogroups.com Subject: Re: [fairchildclub] Jacobs 755 Serv-Aero mount isolation
  I have the same setup John. A few years ago I recall someone here on the group saying that they were working on replacement isolators. They were trying to find a suitable rubber. I also think there was some conversation about how the original mounts were installed. It may not be a simple replacement. The Serv-Aero guys are still around but I have talked to them and they don't support the mount any more. Hopefully you get some responses because I know the day is coming when I will have to do something with mine as well. 
MattN4263S

From: "krossbow@comcast.net [fairchildclub]"
To: fairchildclub@yahoogroups.com
Sent: Monday, October 23, 2017 7:14 AM
Subject: [fairchildclub] Jacobs 755 Serv-Aero mount isolation



Good morning,
I have a 24 with the Jake installed on a Serv-Aero engine mount. The rubber isolation mounts where it attaches to the airframe at the firewall are starting to go. Anybody run across a source for new rubber isolation mounts?
Thanks in advance!
John











'

'Thanks.How close are any of you to be needing these? Are there any of you that are being kept from the wild blue yonder because you are grounded until you replace them?

Sent from my iPhone

On Oct 27, 2017, at 7:30 PM, John Armbrust krossbow@comcast.net [fairchildclub] wrote:

 
Oh I didn’t realize you were on this board! Very good, yes take care of yourselves and we will hook up with you when all is well.
Thanks!

John Armbrust
On Oct 27, 2017, at 19:21, Kevin Trumpore ketrumpore@yahoo.com [fairchildclub] wrote:

 
Like Jamie stated both dad and I have health issues. I will not be doing any more engine mount work until after the first of the year. RegardsKevin

Sent from my iPhone
On Oct 27, 2017, at 6:57 PM, John Armbrust krossbow@comcast.net [fairchildclub] wrote:

 
Roger. I’ve put in a couple phone calls but so far no call back. I will keep trying. When I do reach them I will indicate that a number of folks are interested.

John Armbrust
On Oct 27, 2017, at 17:50, Tj kottre@yahoo.com [fairchildclub] wrote:

 
Looks like I will need a set as well. TomN89J 

Sent from my iPhone
On Oct 26, 2017, at 3:57 AM, Matthew & Patricia Banks flyingbanks@yahoo.com [fairchildclub] wrote:

 
John ...Let me know how you make out on the mounts... I may want to get in line for a set as well. 
MattN4263S

From: "jamietreat jamietreat@q.com [fairchildclub]"
To: fairchildclub@yahoogroups.com
Sent: Wednesday, October 25, 2017 9:08 AM
Subject: Re: [fairchildclub] Jacobs 755 Serv-Aero mount isolation




908-459-5858
Southland manuf in NJ  Larry Trumpore and son. Both have health issues. Keep calling.
Sent via the Samsung Galaxy S7, an AT&T 4G LTE smartphone
-------- Original message --------From: "John Armbrust krossbow@comcast.net [fairchildclub]" Date: 10/24/17 10:26 AM (GMT-06:00) To: fairchildclub@yahoogroups.com Subject: Re: [fairchildclub] Jacobs 755 Serv-Aero mount isolation
  Jamie,
Which Southland Manufacturing? Do you know what city they are in?

John Armbrust
On Oct 24, 2017, at 08:50, jamietreat jamietreat@q.com [fairchildclub] wrote:

  Southland manuf has the bushings


Sent via the Samsung Galaxy S7, an AT&T 4G LTE smartphone
-------- Original message --------From: "Matthew & Patricia Banks flyingbanks@yahoo.com [fairchildclub]" Date: 10/24/17 6:38 AM (GMT-06:00) To: fairchildclub@yahoogroups.com Subject: Re: [fairchildclub] Jacobs 755 Serv-Aero mount isolation
  I have the same setup John. A few years ago I recall someone here on the group saying that they were working on replacement isolators. They were trying to find a suitable rubber. I also think there was some conversation about how the original mounts were installed. It may not be a simple replacement. The Serv-Aero guys are still around but I have talked to them and they don't support the mount any more. Hopefully you get some responses because I know the day is coming when I will have to do something with mine as well. 
MattN4263S

From: "krossbow@comcast.net [fairchildclub]"
To: fairchildclub@yahoogroups.com
Sent: Monday, October 23, 2017 7:14 AM
Subject: [fairchildclub] Jacobs 755 Serv-Aero mount isolation



Good morning,
I have a 24 with the Jake installed on a Serv-Aero engine mount. The rubber isolation mounts where it attaches to the airframe at the firewall are starting to go. Anybody run across a source for new rubber isolation mounts?
Thanks in advance!
John












'

'I know I’m still good for a while. I can certainly wait until things get right at your end. After the turn of the year would be ok for me...

John Armbrust

On Oct 28, 2017, at 09:13, Kevin Trumpore ketrumpore@yahoo.com [fairchildclub] wrote:

 
Thanks.How close are any of you to be needing these? Are there any of you that are being kept from the wild blue yonder because you are grounded until you replace them?

Sent from my iPhone
On Oct 27, 2017, at 7:30 PM, John Armbrust krossbow@comcast.net [fairchildclub] wrote:

 
Oh I didn’t realize you were on this board! Very good, yes take care of yourselves and we will hook up with you when all is well.
Thanks!

John Armbrust
On Oct 27, 2017, at 19:21, Kevin Trumpore ketrumpore@yahoo.com [fairchildclub] wrote:

 
Like Jamie stated both dad and I have health issues. I will not be doing any more engine mount work until after the first of the year. RegardsKevin

Sent from my iPhone
On Oct 27, 2017, at 6:57 PM, John Armbrust krossbow@comcast.net [fairchildclub] wrote:

 
Roger. I’ve put in a couple phone calls but so far no call back. I will keep trying. When I do reach them I will indicate that a number of folks are interested.

John Armbrust
On Oct 27, 2017, at 17:50, Tj kottre@yahoo.com [fairchildclub] wrote:

 
Looks like I will need a set as well. TomN89J 

Sent from my iPhone
On Oct 26, 2017, at 3:57 AM, Matthew & Patricia Banks flyingbanks@yahoo.com [fairchildclub] wrote:

 
John ...Let me know how you make out on the mounts... I may want to get in line for a set as well. 
MattN4263S

From: "jamietreat jamietreat@q.com [fairchildclub]"
To: fairchildclub@yahoogroups.com
Sent: Wednesday, October 25, 2017 9:08 AM
Subject: Re: [fairchildclub] Jacobs 755 Serv-Aero mount isolation




908-459-5858
Southland manuf in NJ  Larry Trumpore and son. Both have health issues. Keep calling.
Sent via the Samsung Galaxy S7, an AT&T 4G LTE smartphone
-------- Original message --------From: "John Armbrust krossbow@comcast.net [fairchildclub]" Date: 10/24/17 10:26 AM (GMT-06:00) To: fairchildclub@yahoogroups.com Subject: Re: [fairchildclub] Jacobs 755 Serv-Aero mount isolation
  Jamie,
Which Southland Manufacturing? Do you know what city they are in?

John Armbrust
On Oct 24, 2017, at 08:50, jamietreat jamietreat@q.com [fairchildclub] wrote:

  Southland manuf has the bushings


Sent via the Samsung Galaxy S7, an AT&T 4G LTE smartphone
-------- Original message --------From: "Matthew & Patricia Banks flyingbanks@yahoo.com [fairchildclub]" Date: 10/24/17 6:38 AM (GMT-06:00) To: fairchildclub@yahoogroups.com Subject: Re: [fairchildclub] Jacobs 755 Serv-Aero mount isolation
  I have the same setup John. A few years ago I recall someone here on the group saying that they were working on replacement isolators. They were trying to find a suitable rubber. I also think there was some conversation about how the original mounts were installed. It may not be a simple replacement. The Serv-Aero guys are still around but I have talked to them and they don't support the mount any more. Hopefully you get some responses because I know the day is coming when I will have to do something with mine as well. 
MattN4263S

From: "krossbow@comcast.net [fairchildclub]"
To: fairchildclub@yahoogroups.com
Sent: Monday, October 23, 2017 7:14 AM
Subject: [fairchildclub] Jacobs 755 Serv-Aero mount isolation



Good morning,
I have a 24 with the Jake installed on a Serv-Aero engine mount. The rubber isolation mounts where it attaches to the airframe at the firewall are starting to go. Anybody run across a source for new rubber isolation mounts?
Thanks in advance!
John













'

' Kevin,Your health is way more important than N89J's engine mounts as she is years from seeing the blue skies again.So take care and get well. Tom KottreN89J

On Saturday, October 28, 2017, 5:13:53 AM AKDT, Kevin Trumpore ketrumpore@yahoo.com [fairchildclub] wrote:

 
Thanks.How close are any of you to be needing these? Are there any of you that are being kept from the wild blue yonder because you are grounded until you replace them?

Sent from my iPhone
On Oct 27, 2017, at 7:30 PM, John Armbrust krossbow@comcast.net [fairchildclub] wrote:

 
Oh I didn’t realize you were on this board! Very good, yes take care of yourselves and we will hook up with you when all is well.
Thanks!

John Armbrust
On Oct 27, 2017, at 19:21, Kevin Trumpore ketrumpore@yahoo.com [fairchildclub] wrote:

 
Like Jamie stated both dad and I have health issues. I will not be doing any more engine mount work until after the first of the year. RegardsKevin

Sent from my iPhone
On Oct 27, 2017, at 6:57 PM, John Armbrust krossbow@comcast.net [fairchildclub] wrote:

 
Roger. I’ve put in a couple phone calls but so far no call back. I will keep trying. When I do reach them I will indicate that a number of folks are interested.

John Armbrust
On Oct 27, 2017, at 17:50, Tj kottre@yahoo.com [fairchildclub] wrote:

 
Looks like I will need a set as well. TomN89J 

Sent from my iPhone
On Oct 26, 2017, at 3:57 AM, Matthew & Patricia Banks flyingbanks@yahoo.com [fairchildclub] wrote:

 
John ...Let me know how you make out on the mounts... I may want to get in line for a set as well. 
MattN4263S

From: "jamietreat jamietreat@q.com [fairchildclub]"
To: fairchildclub@yahoogroups.com
Sent: Wednesday, October 25, 2017 9:08 AM
Subject: Re: [fairchildclub] Jacobs 755 Serv-Aero mount isolation




908-459-5858
Southland manuf in NJ  Larry Trumpore and son. Both have health issues. Keep calling.
Sent via the Samsung Galaxy S7, an AT&T 4G LTE smartphone
-------- Original message --------From: "John Armbrust krossbow@comcast.net [fairchildclub]" Date: 10/24/17 10:26 AM (GMT-06:00) To: fairchildclub@yahoogroups.com Subject: Re: [fairchildclub] Jacobs 755 Serv-Aero mount isolation
  Jamie,
Which Southland Manufacturing? Do you know what city they are in?

John Armbrust
On Oct 24, 2017, at 08:50, jamietreat jamietreat@q.com [fairchildclub] wrote:

  Southland manuf has the bushings


Sent via the Samsung Galaxy S7, an AT&T 4G LTE smartphone
-------- Original message --------From: "Matthew & Patricia Banks flyingbanks@yahoo.com [fairchildclub]" Date: 10/24/17 6:38 AM (GMT-06:00) To: fairchildclub@yahoogroups.com Subject: Re: [fairchildclub] Jacobs 755 Serv-Aero mount isolation
  I have the same setup John. A few years ago I recall someone here on the group saying that they were working on replacement isolators. They were trying to find a suitable rubber. I also think there was some conversation about how the original mounts were installed. It may not be a simple replacement. The Serv-Aero guys are still around but I have talked to them and they don't support the mount any more. Hopefully you get some responses because I know the day is coming when I will have to do something with mine as well. 
MattN4263S

From: "krossbow@comcast.net [fairchildclub]"
To: fairchildclub@yahoogroups.com
Sent: Monday, October 23, 2017 7:14 AM
Subject: [fairchildclub] Jacobs 755 Serv-Aero mount isolation



Good morning,
I have a 24 with the Jake installed on a Serv-Aero engine mount. The rubber isolation mounts where it attaches to the airframe at the firewall are starting to go. Anybody run across a source for new rubber isolation mounts?
Thanks in advance!
John












#ygrps-yiv-2003576154 #ygrps-yiv-2003576154yiv3492018986 #ygrps-yiv-2003576154yiv3492018986 -- #ygrps-yiv-2003576154yiv3492018986ygrp-mkp { border:1px solid #d8d8d8;font-family:Arial;margin:10px 0;padding:0 10px;} #ygrps-yiv-2003576154 #ygrps-yiv-2003576154yiv3492018986 #ygrps-yiv-2003576154yiv3492018986ygrp-mkp hr { border:1px solid #d8d8d8;} #ygrps-yiv-2003576154 #ygrps-yiv-2003576154yiv3492018986 #ygrps-yiv-2003576154yiv3492018986ygrp-mkp #ygrps-yiv-2003576154yiv3492018986hd { color:#628c2a;font-size:85%;font-weight:700;line-height:122%;margin:10px 0;} #ygrps-yiv-2003576154 #ygrps-yiv-2003576154yiv3492018986 #ygrps-yiv-2003576154yiv3492018986ygrp-mkp #ygrps-yiv-2003576154yiv3492018986ads { margin-bottom:10px;} #ygrps-yiv-2003576154 #ygrps-yiv-2003576154yiv3492018986 #ygrps-yiv-2003576154yiv3492018986ygrp-mkp .ygrps-yiv-2003576154yiv3492018986ad { padding:0 0;} #ygrps-yiv-2003576154 #ygrps-yiv-2003576154yiv3492018986 #ygrps-yiv-2003576154yiv3492018986ygrp-mkp .ygrps-yiv-2003576154yiv3492018986ad p { margin:0;} #ygrps-yiv-2003576154 #ygrps-yiv-2003576154yiv3492018986 #ygrps-yiv-2003576154yiv3492018986ygrp-mkp .ygrps-yiv-2003576154yiv3492018986ad a { color:#0000ff;text-decoration:none;} #ygrps-yiv-2003576154 #ygrps-yiv-2003576154yiv3492018986 #ygrps-yiv-2003576154yiv3492018986ygrp-sponsor #ygrps-yiv-2003576154yiv3492018986ygrp-lc { font-family:Arial;} #ygrps-yiv-2003576154 #ygrps-yiv-2003576154yiv3492018986 #ygrps-yiv-2003576154yiv3492018986ygrp-sponsor #ygrps-yiv-2003576154yiv3492018986ygrp-lc #ygrps-yiv-2003576154yiv3492018986hd { margin:10px 0px;font-weight:700;font-size:78%;line-height:122%;} #ygrps-yiv-2003576154 #ygrps-yiv-2003576154yiv3492018986 #ygrps-yiv-2003576154yiv3492018986ygrp-sponsor #ygrps-yiv-2003576154yiv3492018986ygrp-lc .ygrps-yiv-2003576154yiv3492018986ad { margin-bottom:10px;padding:0 0;} #ygrps-yiv-2003576154 #ygrps-yiv-2003576154yiv3492018986 #ygrps-yiv-2003576154yiv3492018986actions { font-family:Verdana;font-size:11px;padding:10px 0;} #ygrps-yiv-2003576154 #ygrps-yiv-2003576154yiv3492018986 #ygrps-yiv-2003576154yiv3492018986activity { background-color:#e0ecee;float:left;font-family:Verdana;font-size:10px;padding:10px;} #ygrps-yiv-2003576154 #ygrps-yiv-2003576154yiv3492018986 #ygrps-yiv-2003576154yiv3492018986activity span { font-weight:700;} #ygrps-yiv-2003576154 #ygrps-yiv-2003576154yiv3492018986 #ygrps-yiv-2003576154yiv3492018986activity span:first-child { text-transform:uppercase;} #ygrps-yiv-2003576154 #ygrps-yiv-2003576154yiv3492018986 #ygrps-yiv-2003576154yiv3492018986activity span a { color:#5085b6;text-decoration:none;} #ygrps-yiv-2003576154 #ygrps-yiv-2003576154yiv3492018986 #ygrps-yiv-2003576154yiv3492018986activity span span { color:#ff7900;} #ygrps-yiv-2003576154 #ygrps-yiv-2003576154yiv3492018986 #ygrps-yiv-2003576154yiv3492018986activity span .ygrps-yiv-2003576154yiv3492018986underline { text-decoration:underline;} #ygrps-yiv-2003576154 #ygrps-yiv-2003576154yiv3492018986 .ygrps-yiv-2003576154yiv3492018986attach { clear:both;display:table;font-family:Arial;font-size:12px;padding:10px 0;width:400px;} #ygrps-yiv-2003576154 #ygrps-yiv-2003576154yiv3492018986 .ygrps-yiv-2003576154yiv3492018986attach div a { text-decoration:none;} #ygrps-yiv-2003576154 #ygrps-yiv-2003576154yiv3492018986 .ygrps-yiv-2003576154yiv3492018986attach img { border:none;padding-right:5px;} #ygrps-yiv-2003576154 #ygrps-yiv-2003576154yiv3492018986 .ygrps-yiv-2003576154yiv3492018986attach label { display:block;margin-bottom:5px;} #ygrps-yiv-2003576154 #ygrps-yiv-2003576154yiv3492018986 .ygrps-yiv-2003576154yiv3492018986attach label a { text-decoration:none;} #ygrps-yiv-2003576154 #ygrps-yiv-2003576154yiv3492018986 blockquote { margin:0 0 0 4px;} #ygrps-yiv-2003576154 #ygrps-yiv-2003576154yiv3492018986 .ygrps-yiv-2003576154yiv3492018986bold { font-family:Arial;font-size:13px;font-weight:700;} #ygrps-yiv-2003576154 #ygrps-yiv-2003576154yiv3492018986 .ygrps-yiv-2003576154yiv3492018986bold a { text-decoration:none;} #ygrps-yiv-2003576154 #ygrps-yiv-2003576154yiv3492018986 dd.ygrps-yiv-2003576154yiv3492018986last p a { font-family:Verdana;font-weight:700;} #ygrps-yiv-2003576154 #ygrps-yiv-2003576154yiv3492018986 dd.ygrps-yiv-2003576154yiv3492018986last p span { margin-right:10px;font-family:Verdana;font-weight:700;} #ygrps-yiv-2003576154 #ygrps-yiv-2003576154yiv3492018986 dd.ygrps-yiv-2003576154yiv3492018986last p span.ygrps-yiv-2003576154yiv3492018986yshortcuts { margin-right:0;} #ygrps-yiv-2003576154 #ygrps-yiv-2003576154yiv3492018986 div.ygrps-yiv-2003576154yiv3492018986attach-table div div a { text-decoration:none;} #ygrps-yiv-2003576154 #ygrps-yiv-2003576154yiv3492018986 div.ygrps-yiv-2003576154yiv3492018986attach-table { width:400px;} #ygrps-yiv-2003576154 #ygrps-yiv-2003576154yiv3492018986 div.ygrps-yiv-2003576154yiv3492018986file-title a, #ygrps-yiv-2003576154 #ygrps-yiv-2003576154yiv3492018986 div.ygrps-yiv-2003576154yiv3492018986file-title a:active, #ygrps-yiv-2003576154 #ygrps-yiv-2003576154yiv3492018986 div.ygrps-yiv-2003576154yiv3492018986file-title a:hover, #ygrps-yiv-2003576154 #ygrps-yiv-2003576154yiv3492018986 div.ygrps-yiv-2003576154yiv3492018986file-title a:visited { text-decoration:none;} #ygrps-yiv-2003576154 #ygrps-yiv-2003576154yiv3492018986 div.ygrps-yiv-2003576154yiv3492018986photo-title a, #ygrps-yiv-2003576154 #ygrps-yiv-2003576154yiv3492018986 div.ygrps-yiv-2003576154yiv3492018986photo-title a:active, #ygrps-yiv-2003576154 #ygrps-yiv-2003576154yiv3492018986 div.ygrps-yiv-2003576154yiv3492018986photo-title a:hover, #ygrps-yiv-2003576154 #ygrps-yiv-2003576154yiv3492018986 div.ygrps-yiv-2003576154yiv3492018986photo-title a:visited { text-decoration:none;} #ygrps-yiv-2003576154 #ygrps-yiv-2003576154yiv3492018986 div#ygrps-yiv-2003576154yiv3492018986ygrp-mlmsg #ygrps-yiv-2003576154yiv3492018986ygrp-msg p a span.ygrps-yiv-2003576154yiv3492018986yshortcuts { font-family:Verdana;font-size:10px;font-weight:normal;} #ygrps-yiv-2003576154 #ygrps-yiv-2003576154yiv3492018986 .ygrps-yiv-2003576154yiv3492018986green { color:#628c2a;} #ygrps-yiv-2003576154 #ygrps-yiv-2003576154yiv3492018986 .ygrps-yiv-2003576154yiv3492018986MsoNormal { margin:0 0 0 0;} #ygrps-yiv-2003576154 #ygrps-yiv-2003576154yiv3492018986 o { font-size:0;} #ygrps-yiv-2003576154 #ygrps-yiv-2003576154yiv3492018986 #ygrps-yiv-2003576154yiv3492018986photos div { float:left;width:72px;} #ygrps-yiv-2003576154 #ygrps-yiv-2003576154yiv3492018986 #ygrps-yiv-2003576154yiv3492018986photos div div { border:1px solid #666666;min-height:62px;overflow:hidden;width:62px;} #ygrps-yiv-2003576154 #ygrps-yiv-2003576154yiv3492018986 #ygrps-yiv-2003576154yiv3492018986photos div label { color:#666666;font-size:10px;overflow:hidden;text-align:center;white-space:nowrap;width:64px;} #ygrps-yiv-2003576154 #ygrps-yiv-2003576154yiv3492018986 #ygrps-yiv-2003576154yiv3492018986reco-category { font-size:77%;} #ygrps-yiv-2003576154 #ygrps-yiv-2003576154yiv3492018986 #ygrps-yiv-2003576154yiv3492018986reco-desc { font-size:77%;} #ygrps-yiv-2003576154 #ygrps-yiv-2003576154yiv3492018986 .ygrps-yiv-2003576154yiv3492018986replbq { margin:4px;} #ygrps-yiv-2003576154 #ygrps-yiv-2003576154yiv3492018986 #ygrps-yiv-2003576154yiv3492018986ygrp-actbar div a:first-child { margin-right:2px;padding-right:5px;} #ygrps-yiv-2003576154 #ygrps-yiv-2003576154yiv3492018986 #ygrps-yiv-2003576154yiv3492018986ygrp-mlmsg { font-size:13px;font-family:Arial, helvetica, clean, sans-serif;} #ygrps-yiv-2003576154 #ygrps-yiv-2003576154yiv3492018986 #ygrps-yiv-2003576154yiv3492018986ygrp-mlmsg table { font-size:inherit;font:100%;} #ygrps-yiv-2003576154 #ygrps-yiv-2003576154yiv3492018986 #ygrps-yiv-2003576154yiv3492018986ygrp-mlmsg select, #ygrps-yiv-2003576154 #ygrps-yiv-2003576154yiv3492018986 input, #ygrps-yiv-2003576154 #ygrps-yiv-2003576154yiv3492018986 textarea { font:99% Arial, Helvetica, clean, sans-serif;} #ygrps-yiv-2003576154 #ygrps-yiv-2003576154yiv3492018986 #ygrps-yiv-2003576154yiv3492018986ygrp-mlmsg pre, #ygrps-yiv-2003576154 #ygrps-yiv-2003576154yiv3492018986 code { font:115% monospace;} #ygrps-yiv-2003576154 #ygrps-yiv-2003576154yiv3492018986 #ygrps-yiv-2003576154yiv3492018986ygrp-mlmsg * { line-height:1.22em;} #ygrps-yiv-2003576154 #ygrps-yiv-2003576154yiv3492018986 #ygrps-yiv-2003576154yiv3492018986ygrp-mlmsg #ygrps-yiv-2003576154yiv3492018986logo { padding-bottom:10px;} #ygrps-yiv-2003576154 #ygrps-yiv-2003576154yiv3492018986 #ygrps-yiv-2003576154yiv3492018986ygrp-msg p a { font-family:Verdana;} #ygrps-yiv-2003576154 #ygrps-yiv-2003576154yiv3492018986 #ygrps-yiv-2003576154yiv3492018986ygrp-msg p#ygrps-yiv-2003576154yiv3492018986attach-count span { color:#1E66AE;font-weight:700;} #ygrps-yiv-2003576154 #ygrps-yiv-2003576154yiv3492018986 #ygrps-yiv-2003576154yiv3492018986ygrp-reco #ygrps-yiv-2003576154yiv3492018986reco-head { color:#ff7900;font-weight:700;} #ygrps-yiv-2003576154 #ygrps-yiv-2003576154yiv3492018986 #ygrps-yiv-2003576154yiv3492018986ygrp-reco { margin-bottom:20px;padding:0px;} #ygrps-yiv-2003576154 #ygrps-yiv-2003576154yiv3492018986 #ygrps-yiv-2003576154yiv3492018986ygrp-sponsor #ygrps-yiv-2003576154yiv3492018986ov li a { font-size:130%;text-decoration:none;} #ygrps-yiv-2003576154 #ygrps-yiv-2003576154yiv3492018986 #ygrps-yiv-2003576154yiv3492018986ygrp-sponsor #ygrps-yiv-2003576154yiv3492018986ov li { font-size:77%;list-style-type:square;padding:6px 0;} #ygrps-yiv-2003576154 #ygrps-yiv-2003576154yiv3492018986 #ygrps-yiv-2003576154yiv3492018986ygrp-sponsor #ygrps-yiv-2003576154yiv3492018986ov ul { margin:0;padding:0 0 0 8px;} #ygrps-yiv-2003576154 #ygrps-yiv-2003576154yiv3492018986 #ygrps-yiv-2003576154yiv3492018986ygrp-text { font-family:Georgia;} #ygrps-yiv-2003576154 #ygrps-yiv-2003576154yiv3492018986 #ygrps-yiv-2003576154yiv3492018986ygrp-text p { margin:0 0 1em 0;} #ygrps-yiv-2003576154 #ygrps-yiv-2003576154yiv3492018986 #ygrps-yiv-2003576154yiv3492018986ygrp-text tt { font-size:120%;} #ygrps-yiv-2003576154 #ygrps-yiv-2003576154yiv3492018986 #ygrps-yiv-2003576154yiv3492018986ygrp-vital ul li:last-child { border-right:none !important;} #ygrps-yiv-2003576154 '

'Thanks.Blood clots in my lungs landed me in the hospital for most of June. While in the hospital I got pneumonia. Neither of these are fun. The blood thinners they put me on have their own very bad side effects, not the least of which is uncontrollable bleeding. Owning/working in a machine shop, bleeding is a part of most every day. I was driving home from seeing a customer and got a nose bleed. 5 hours later I was still bleeding, in the 6th hour it finally slowed enough for me to be sent home from the hospital. I tell you this not looking for sympathy but to bring to light the dangers I face if I were to get hurt while working on your mounts. It's not that I don't want or need the work, Cash flow sucks, money is tight, but life is short enough. If I don't take the time to heal now I may not be here later to help with your projects!

Sent from my iPhone

On Oct 28, 2017, at 1:54 PM, tom kottre kottre@yahoo.com [fairchildclub] wrote:

 
Kevin,Your health is way more important than N89J's engine mounts as she is years from seeing the blue skies again.So take care and get well. Tom KottreN89J

On Saturday, October 28, 2017, 5:13:53 AM AKDT, Kevin Trumpore ketrumpore@yahoo.com [fairchildclub] wrote:

 
Thanks.How close are any of you to be needing these? Are there any of you that are being kept from the wild blue yonder because you are grounded until you replace them?

Sent from my iPhone
On Oct 27, 2017, at 7:30 PM, John Armbrust krossbow@comcast.net [fairchildclub] wrote:

 
Oh I didn’t realize you were on this board! Very good, yes take care of yourselves and we will hook up with you when all is well.
Thanks!

John Armbrust
On Oct 27, 2017, at 19:21, Kevin Trumpore ketrumpore@yahoo.com [fairchildclub] wrote:

 
Like Jamie stated both dad and I have health issues. I will not be doing any more engine mount work until after the first of the year. RegardsKevin

Sent from my iPhone
On Oct 27, 2017, at 6:57 PM, John Armbrust krossbow@comcast.net [fairchildclub] wrote:

 
Roger. I’ve put in a couple phone calls but so far no call back. I will keep trying. When I do reach them I will indicate that a number of folks are interested.

John Armbrust
On Oct 27, 2017, at 17:50, Tj kottre@yahoo.com [fairchildclub] wrote:

 
Looks like I will need a set as well. TomN89J 

Sent from my iPhone
On Oct 26, 2017, at 3:57 AM, Matthew & Patricia Banks flyingbanks@yahoo.com [fairchildclub] wrote:

 
John ...Let me know how you make out on the mounts... I may want to get in line for a set as well. 
MattN4263S

From: "jamietreat jamietreat@q.com [fairchildclub]"
To: fairchildclub@yahoogroups.com
Sent: Wednesday, October 25, 2017 9:08 AM
Subject: Re: [fairchildclub] Jacobs 755 Serv-Aero mount isolation




908-459-5858
Southland manuf in NJ  Larry Trumpore and son. Both have health issues. Keep calling.
Sent via the Samsung Galaxy S7, an AT&T 4G LTE smartphone
-------- Original message --------From: "John Armbrust krossbow@comcast.net [fairchildclub]" Date: 10/24/17 10:26 AM (GMT-06:00) To: fairchildclub@yahoogroups.com Subject: Re: [fairchildclub] Jacobs 755 Serv-Aero mount isolation
  Jamie,
Which Southland Manufacturing? Do you know what city they are in?

John Armbrust
On Oct 24, 2017, at 08:50, jamietreat jamietreat@q.com [fairchildclub] wrote:

  Southland manuf has the bushings


Sent via the Samsung Galaxy S7, an AT&T 4G LTE smartphone
-------- Original message --------From: "Matthew & Patricia Banks flyingbanks@yahoo.com [fairchildclub]" Date: 10/24/17 6:38 AM (GMT-06:00) To: fairchildclub@yahoogroups.com Subject: Re: [fairchildclub] Jacobs 755 Serv-Aero mount isolation
  I have the same setup John. A few years ago I recall someone here on the group saying that they were working on replacement isolators. They were trying to find a suitable rubber. I also think there was some conversation about how the original mounts were installed. It may not be a simple replacement. The Serv-Aero guys are still around but I have talked to them and they don't support the mount any more. Hopefully you get some responses because I know the day is coming when I will have to do something with mine as well. 
MattN4263S

From: "krossbow@comcast.net [fairchildclub]"
To: fairchildclub@yahoogroups.com
Sent: Monday, October 23, 2017 7:14 AM
Subject: [fairchildclub] Jacobs 755 Serv-Aero mount isolation



Good morning,
I have a 24 with the Jake installed on a Serv-Aero engine mount. The rubber isolation mounts where it attaches to the airframe at the firewall are starting to go. Anybody run across a source for new rubber isolation mounts?
Thanks in advance!
John













'

'Hi Kevin I just saw the thread you have going with John and Tom and when you have recovered I would like to get a set also. Mine are all right for now and I am in no hurry for them. Take care and get well.George Leighton'

'Yikes!
By all means take care of yourself!

John Armbrust

On Oct 28, 2017, at 14:35, Kevin Trumpore ketrumpore@yahoo.com [fairchildclub] wrote:

 
Thanks.Blood clots in my lungs landed me in the hospital for most of June. While in the hospital I got pneumonia. Neither of these are fun. The blood thinners they put me on have their own very bad side effects, not the least of which is uncontrollable bleeding. Owning/working in a machine shop, bleeding is a part of most every day. I was driving home from seeing a customer and got a nose bleed. 5 hours later I was still bleeding, in the 6th hour it finally slowed enough for me to be sent home from the hospital. I tell you this not looking for sympathy but to bring to light the dangers I face if I were to get hurt while working on your mounts. It's not that I don't want or need the work, Cash flow sucks, money is tight, but life is short enough. If I don't take the time to heal now I may not be here later to help with your projects!

Sent from my iPhone
On Oct 28, 2017, at 1:54 PM, tom kottre kottre@yahoo.com [fairchildclub] wrote:

 
Kevin,Your health is way more important than N89J's engine mounts as she is years from seeing the blue skies again.So take care and get well. Tom KottreN89J

On Saturday, October 28, 2017, 5:13:53 AM AKDT, Kevin Trumpore ketrumpore@yahoo.com [fairchildclub] wrote:

 
Thanks.How close are any of you to be needing these? Are there any of you that are being kept from the wild blue yonder because you are grounded until you replace them?

Sent from my iPhone
On Oct 27, 2017, at 7:30 PM, John Armbrust krossbow@comcast.net [fairchildclub] wrote:

 
Oh I didn’t realize you were on this board! Very good, yes take care of yourselves and we will hook up with you when all is well.
Thanks!

John Armbrust
On Oct 27, 2017, at 19:21, Kevin Trumpore ketrumpore@yahoo.com [fairchildclub] wrote:

 
Like Jamie stated both dad and I have health issues. I will not be doing any more engine mount work until after the first of the year. RegardsKevin

Sent from my iPhone
On Oct 27, 2017, at 6:57 PM, John Armbrust krossbow@comcast.net [fairchildclub] wrote:

 
Roger. I’ve put in a couple phone calls but so far no call back. I will keep trying. When I do reach them I will indicate that a number of folks are interested.

John Armbrust
On Oct 27, 2017, at 17:50, Tj kottre@yahoo.com [fairchildclub] wrote:

 
Looks like I will need a set as well. TomN89J 

Sent from my iPhone
On Oct 26, 2017, at 3:57 AM, Matthew & Patricia Banks flyingbanks@yahoo.com [fairchildclub] wrote:

 
John ...Let me know how you make out on the mounts... I may want to get in line for a set as well. 
MattN4263S

From: "jamietreat jamietreat@q.com [fairchildclub]"
To: fairchildclub@yahoogroups.com
Sent: Wednesday, October 25, 2017 9:08 AM
Subject: Re: [fairchildclub] Jacobs 755 Serv-Aero mount isolation




908-459-5858
Southland manuf in NJ  Larry Trumpore and son. Both have health issues. Keep calling.
Sent via the Samsung Galaxy S7, an AT&T 4G LTE smartphone
-------- Original message --------From: "John Armbrust krossbow@comcast.net [fairchildclub]" Date: 10/24/17 10:26 AM (GMT-06:00) To: fairchildclub@yahoogroups.com Subject: Re: [fairchildclub] Jacobs 755 Serv-Aero mount isolation
  Jamie,
Which Southland Manufacturing? Do you know what city they are in?

John Armbrust
On Oct 24, 2017, at 08:50, jamietreat jamietreat@q.com [fairchildclub] wrote:

  Southland manuf has the bushings


Sent via the Samsung Galaxy S7, an AT&T 4G LTE smartphone
-------- Original message --------From: "Matthew & Patricia Banks flyingbanks@yahoo.com [fairchildclub]" Date: 10/24/17 6:38 AM (GMT-06:00) To: fairchildclub@yahoogroups.com Subject: Re: [fairchildclub] Jacobs 755 Serv-Aero mount isolation
  I have the same setup John. A few years ago I recall someone here on the group saying that they were working on replacement isolators. They were trying to find a suitable rubber. I also think there was some conversation about how the original mounts were installed. It may not be a simple replacement. The Serv-Aero guys are still around but I have talked to them and they don't support the mount any more. Hopefully you get some responses because I know the day is coming when I will have to do something with mine as well. 
MattN4263S

From: "krossbow@comcast.net [fairchildclub]"
To: fairchildclub@yahoogroups.com
Sent: Monday, October 23, 2017 7:14 AM
Subject: [fairchildclub] Jacobs 755 Serv-Aero mount isolation



Good morning,
I have a 24 with the Jake installed on a Serv-Aero engine mount. The rubber isolation mounts where it attaches to the airframe at the firewall are starting to go. Anybody run across a source for new rubber isolation mounts?
Thanks in advance!
John














'

' What kind of blood thinner did they put you on? I'm on Eliquis and don't have any of those problems. Could  be dosage difference too.   John   In a message dated 10/28/2017 12:35:27 P.M. Mountain Daylight Time, fairchildclub@yahoogroups.com writes:

Thanks. Blood clots in my lungs landed me in the hospital for most of June. While in the hospital I got pneumonia. Neither of these are fun.  The blood thinners they put me on have their own very bad side effects, not the least of which is uncontrollable bleeding. Owning/working in a machine shop, bleeding is a part of most every day.  I was driving home from seeing a customer and got a nose bleed. 5 hours later I was still bleeding, in the 6th hour it finally slowed enough for me to be sent home from the hospital.  I tell you this not looking for sympathy but to bring to light the dangers I face if I were to get hurt while working on your mounts.  It's not that I don't want or need the work, Cash flow sucks, money is tight, but life is short enough. If I don't take the time to heal now I may not be here later to help with your projects!

Sent from my iPhone
On Oct 28, 2017, at 1:54 PM, tom kottre kottre@yahoo.com [fairchildclub] fairchildclub@yahoogroups.com> wrote:

 
Kevin, Your health is way more important than N89J's engine mounts as she is years from seeing the blue skies again. So take care and get well.  Tom Kottre N89J

On Saturday, October 28, 2017, 5:13:53 AM AKDT, Kevin Trumpore ketrumpore@yahoo.com [fairchildclub] fairchildclub@yahoogroups.com> wrote:

 
Thanks. How close are any of you to be needing these?  Are there any of you that are being kept from the wild blue yonder because you are grounded until you replace them?

Sent from my iPhone
On Oct 27, 2017, at 7:30 PM, John Armbrust krossbow@comcast.net [fairchildclub] fairchildclub@yahoogroups.com> wrote:

 
Oh I didn’t realize you were on this board! Very good, yes take care of yourselves and we will hook up with you when all is well.
Thanks!

John Armbrust
On Oct 27, 2017, at 19:21, Kevin Trumpore ketrumpore@yahoo.com [fairchildclub] fairchildclub@yahoogroups.com> wrote:

 
Like Jamie stated both dad and I have health issues. I will not be doing any more engine mount work until after the first of the year.  Regards Kevin

Sent from my iPhone
On Oct 27, 2017, at 6:57 PM, John Armbrust krossbow@comcast.net [fairchildclub] fairchildclub@yahoogroups.com> wrote:

 
Roger. I’ve put in a couple phone calls but so far no call back. I will keep trying. When I do reach them I will indicate that a number of folks are interested.

John Armbrust
On Oct 27, 2017, at 17:50, Tj kottre@yahoo.com [fairchildclub] fairchildclub@yahoogroups.com> wrote:

 
Looks like I will need a set as well.  Tom N89J 

Sent from my iPhone
On Oct 26, 2017, at 3:57 AM, Matthew & Patricia Banks flyingbanks@yahoo.com [fairchildclub] fairchildclub@yahoogroups.com> wrote:

 
John ... Let me know how you make out on the mounts... I may want to get in line for a set as well. 
Matt N4263S

From: "jamietreat jamietreat@q.com [fairchildclub]" fairchildclub@yahoogroups.com>
To: fairchildclub@yahoogroups.com
Sent: Wednesday, October 25, 2017 9:08 AM
Subject: Re: [fairchildclub] Jacobs 755 Serv-Aero mount isolation




908-459-5858
Southland manuf in NJ  Larry Trumpore and son. Both have health issues. Keep calling.
Sent via the Samsung Galaxy S7, an AT&T 4G LTE smartphone
-------- Original message -------- From: "John Armbrust krossbow@comcast.net [fairchildclub]" fairchildclub@yahoogroups.com> Date: 10/24/17 10:26 AM (GMT-06:00) To: fairchildclub@yahoogroups.com Subject: Re: [fairchildclub] Jacobs 755 Serv-Aero mount isolation
  Jamie,
Which Southland Manufacturing? Do you know what city they are in?

John Armbrust
On Oct 24, 2017, at 08:50, jamietreat jamietreat@q.com [fairchildclub] fairchildclub@yahoogroups.com> wrote:

  Southland manuf has the bushings


Sent via the Samsung Galaxy S7, an AT&T 4G LTE smartphone
-------- Original message -------- From: "Matthew & Patricia Banks flyingbanks@yahoo.com [fairchildclub]" fairchildclub@yahoogroups.com> Date: 10/24/17 6:38 AM (GMT-06:00) To: fairchildclub@yahoogroups.com Subject: Re: [fairchildclub] Jacobs 755 Serv-Aero mount isolation
  I have the same setup John. A few years ago I recall someone here on the group saying that they were working on replacement isolators. They were trying to find a suitable rubber. I also think there was some conversation about how the original mounts were installed. It may not be a simple replacement. The Serv-Aero guys are still around but I have talked to them and they don't support the mount any more. Hopefully you get some responses because I know the day is coming when I will have to do something with mine as well. 
Matt N4263S

From: "krossbow@comcast.net [fairchildclub]" fairchildclub@yahoogroups.com>
To: fairchildclub@yahoogroups.com
Sent: Monday, October 23, 2017 7:14 AM
Subject: [fairchildclub] Jacobs 755 Serv-Aero mount isolation



Good morning,
I have a 24 with the Jake installed on a Serv-Aero engine mount. The rubber isolation mounts where it attaches to the airframe at the firewall are starting to go. Anybody run across a source for new rubber isolation mounts?
Thanks in advance!
John

'

'
Hi,Did you ever get the engine mount isolaters?TomN89J

On Thursday, October 26, 2017, 3:57:34 AM AKDT, Matthew & Patricia Banks flyingbanks@yahoo.com [fairchildclub] wrote:

 
John ...Let me know how you make out on the mounts... I may want to get in line for a set as well. 
MattN4263S

From: "jamietreat jamietreat@q.com [fairchildclub]"
To: fairchildclub@yahoogroups.com
Sent: Wednesday, October 25, 2017 9:08 AM
Subject: Re: [fairchildclub] Jacobs 755 Serv-Aero mount isolation




908-459-5858
Southland manuf in NJ  Larry Trumpore and son. Both have health issues. Keep calling.
Sent via the Samsung Galaxy S7, an AT&T 4G LTE smartphone
-------- Original message --------From: "John Armbrust krossbow@comcast.net [fairchildclub]" Date: 10/24/17 10:26 AM (GMT-06:00) To: fairchildclub@yahoogroups.com Subject: Re: [fairchildclub] Jacobs 755 Serv-Aero mount isolation
  Jamie,
Which Southland Manufacturing? Do you know what city they are in?

John Armbrust
On Oct 24, 2017, at 08:50, jamietreat jamietreat@q.com [fairchildclub] wrote:

  Southland manuf has the bushings


Sent via the Samsung Galaxy S7, an AT&T 4G LTE smartphone
-------- Original message --------From: "Matthew & Patricia Banks flyingbanks@yahoo.com [fairchildclub]" Date: 10/24/17 6:38 AM (GMT-06:00) To: fairchildclub@yahoogroups.com Subject: Re: [fairchildclub] Jacobs 755 Serv-Aero mount isolation
  I have the same setup John. A few years ago I recall someone here on the group saying that they were working on replacement isolators. They were trying to find a suitable rubber. I also think there was some conversation about how the original mounts were installed. It may not be a simple replacement. The Serv-Aero guys are still around but I have talked to them and they don't support the mount any more. Hopefully you get some responses because I know the day is coming when I will have to do something with mine as well. 
MattN4263S

From: "krossbow@comcast.net [fairchildclub]"
To: fairchildclub@yahoogroups.com
Sent: Monday, October 23, 2017 7:14 AM
Subject: [fairchildclub] Jacobs 755 Serv-Aero mount isolation



Good morning,
I have a 24 with the Jake installed on a Serv-Aero engine mount. The rubber isolation mounts where it attaches to the airframe at the firewall are starting to go. Anybody run across a source for new rubber isolation mounts?
Thanks in advance!
John







#ygrps-yiv-1643947711 #ygrps-yiv-1643947711yiv9215068126 #ygrps-yiv-1643947711yiv9215068126 -- #ygrps-yiv-1643947711yiv9215068126ygrp-mkp { border:1px solid #d8d8d8;font-family:Arial;margin:10px 0;padding:0 10px;} #ygrps-yiv-1643947711 #ygrps-yiv-1643947711yiv9215068126 #ygrps-yiv-1643947711yiv9215068126ygrp-mkp hr { border:1px solid #d8d8d8;} #ygrps-yiv-1643947711 #ygrps-yiv-1643947711yiv9215068126 #ygrps-yiv-1643947711yiv9215068126ygrp-mkp #ygrps-yiv-1643947711yiv9215068126hd { color:#628c2a;font-size:85%;font-weight:700;line-height:122%;margin:10px 0;} #ygrps-yiv-1643947711 #ygrps-yiv-1643947711yiv9215068126 #ygrps-yiv-1643947711yiv9215068126ygrp-mkp #ygrps-yiv-1643947711yiv9215068126ads { margin-bottom:10px;} #ygrps-yiv-1643947711 #ygrps-yiv-1643947711yiv9215068126 #ygrps-yiv-1643947711yiv9215068126ygrp-mkp .ygrps-yiv-1643947711yiv9215068126ad { padding:0 0;} #ygrps-yiv-1643947711 #ygrps-yiv-1643947711yiv9215068126 #ygrps-yiv-1643947711yiv9215068126ygrp-mkp .ygrps-yiv-1643947711yiv9215068126ad p { margin:0;} #ygrps-yiv-1643947711 #ygrps-yiv-1643947711yiv9215068126 #ygrps-yiv-1643947711yiv9215068126ygrp-mkp .ygrps-yiv-1643947711yiv9215068126ad a { color:#0000ff;text-decoration:none;} #ygrps-yiv-1643947711 #ygrps-yiv-1643947711yiv9215068126 #ygrps-yiv-1643947711yiv9215068126ygrp-sponsor #ygrps-yiv-1643947711yiv9215068126ygrp-lc { font-family:Arial;} #ygrps-yiv-1643947711 #ygrps-yiv-1643947711yiv9215068126 #ygrps-yiv-1643947711yiv9215068126ygrp-sponsor #ygrps-yiv-1643947711yiv9215068126ygrp-lc #ygrps-yiv-1643947711yiv9215068126hd { margin:10px 0px;font-weight:700;font-size:78%;line-height:122%;} #ygrps-yiv-1643947711 #ygrps-yiv-1643947711yiv9215068126 #ygrps-yiv-1643947711yiv9215068126ygrp-sponsor #ygrps-yiv-1643947711yiv9215068126ygrp-lc .ygrps-yiv-1643947711yiv9215068126ad { margin-bottom:10px;padding:0 0;} #ygrps-yiv-1643947711 #ygrps-yiv-1643947711yiv9215068126 #ygrps-yiv-1643947711yiv9215068126actions { font-family:Verdana;font-size:11px;padding:10px 0;} #ygrps-yiv-1643947711 #ygrps-yiv-1643947711yiv9215068126 #ygrps-yiv-1643947711yiv9215068126activity { background-color:#e0ecee;float:left;font-family:Verdana;font-size:10px;padding:10px;} #ygrps-yiv-1643947711 #ygrps-yiv-1643947711yiv9215068126 #ygrps-yiv-1643947711yiv9215068126activity span { font-weight:700;} #ygrps-yiv-1643947711 #ygrps-yiv-1643947711yiv9215068126 #ygrps-yiv-1643947711yiv9215068126activity span:first-child { text-transform:uppercase;} #ygrps-yiv-1643947711 #ygrps-yiv-1643947711yiv9215068126 #ygrps-yiv-1643947711yiv9215068126activity span a { color:#5085b6;text-decoration:none;} #ygrps-yiv-1643947711 #ygrps-yiv-1643947711yiv9215068126 #ygrps-yiv-1643947711yiv9215068126activity span span { color:#ff7900;} #ygrps-yiv-1643947711 #ygrps-yiv-1643947711yiv9215068126 #ygrps-yiv-1643947711yiv9215068126activity span .ygrps-yiv-1643947711yiv9215068126underline { text-decoration:underline;} #ygrps-yiv-1643947711 #ygrps-yiv-1643947711yiv9215068126 .ygrps-yiv-1643947711yiv9215068126attach { clear:both;display:table;font-family:Arial;font-size:12px;padding:10px 0;width:400px;} #ygrps-yiv-1643947711 #ygrps-yiv-1643947711yiv9215068126 .ygrps-yiv-1643947711yiv9215068126attach div a { text-decoration:none;} #ygrps-yiv-1643947711 #ygrps-yiv-1643947711yiv9215068126 .ygrps-yiv-1643947711yiv9215068126attach img { border:none;padding-right:5px;} #ygrps-yiv-1643947711 #ygrps-yiv-1643947711yiv9215068126 .ygrps-yiv-1643947711yiv9215068126attach label { display:block;margin-bottom:5px;} #ygrps-yiv-1643947711 #ygrps-yiv-1643947711yiv9215068126 .ygrps-yiv-1643947711yiv9215068126attach label a { text-decoration:none;} #ygrps-yiv-1643947711 #ygrps-yiv-1643947711yiv9215068126 blockquote { margin:0 0 0 4px;} #ygrps-yiv-1643947711 #ygrps-yiv-1643947711yiv9215068126 .ygrps-yiv-1643947711yiv9215068126bold { font-family:Arial;font-size:13px;font-weight:700;} #ygrps-yiv-1643947711 #ygrps-yiv-1643947711yiv9215068126 .ygrps-yiv-1643947711yiv9215068126bold a { text-decoration:none;} #ygrps-yiv-1643947711 #ygrps-yiv-1643947711yiv9215068126 dd.ygrps-yiv-1643947711yiv9215068126last p a { font-family:Verdana;font-weight:700;} #ygrps-yiv-1643947711 #ygrps-yiv-1643947711yiv9215068126 dd.ygrps-yiv-1643947711yiv9215068126last p span { margin-right:10px;font-family:Verdana;font-weight:700;} #ygrps-yiv-1643947711 #ygrps-yiv-1643947711yiv9215068126 dd.ygrps-yiv-1643947711yiv9215068126last p span.ygrps-yiv-1643947711yiv9215068126yshortcuts { margin-right:0;} #ygrps-yiv-1643947711 #ygrps-yiv-1643947711yiv9215068126 div.ygrps-yiv-1643947711yiv9215068126attach-table div div a { text-decoration:none;} #ygrps-yiv-1643947711 #ygrps-yiv-1643947711yiv9215068126 div.ygrps-yiv-1643947711yiv9215068126attach-table { width:400px;} #ygrps-yiv-1643947711 #ygrps-yiv-1643947711yiv9215068126 div.ygrps-yiv-1643947711yiv9215068126file-title a, #ygrps-yiv-1643947711 #ygrps-yiv-1643947711yiv9215068126 div.ygrps-yiv-1643947711yiv9215068126file-title a:active, #ygrps-yiv-1643947711 #ygrps-yiv-1643947711yiv9215068126 div.ygrps-yiv-1643947711yiv9215068126file-title a:hover, #ygrps-yiv-1643947711 #ygrps-yiv-1643947711yiv9215068126 div.ygrps-yiv-1643947711yiv9215068126file-title a:visited { text-decoration:none;} #ygrps-yiv-1643947711 #ygrps-yiv-1643947711yiv9215068126 div.ygrps-yiv-1643947711yiv9215068126photo-title a, #ygrps-yiv-1643947711 #ygrps-yiv-1643947711yiv9215068126 div.ygrps-yiv-1643947711yiv9215068126photo-title a:active, #ygrps-yiv-1643947711 #ygrps-yiv-1643947711yiv9215068126 div.ygrps-yiv-1643947711yiv9215068126photo-title a:hover, #ygrps-yiv-1643947711 #ygrps-yiv-1643947711yiv9215068126 div.ygrps-yiv-1643947711yiv9215068126photo-title a:visited { text-decoration:none;} #ygrps-yiv-1643947711 #ygrps-yiv-1643947711yiv9215068126 div#ygrps-yiv-1643947711yiv9215068126ygrp-mlmsg #ygrps-yiv-1643947711yiv9215068126ygrp-msg p a span.ygrps-yiv-1643947711yiv9215068126yshortcuts { font-family:Verdana;font-size:10px;font-weight:normal;} #ygrps-yiv-1643947711 #ygrps-yiv-1643947711yiv9215068126 .ygrps-yiv-1643947711yiv9215068126green { color:#628c2a;} #ygrps-yiv-1643947711 #ygrps-yiv-1643947711yiv9215068126 .ygrps-yiv-1643947711yiv9215068126MsoNormal { margin:0 0 0 0;} #ygrps-yiv-1643947711 #ygrps-yiv-1643947711yiv9215068126 o { font-size:0;} #ygrps-yiv-1643947711 #ygrps-yiv-1643947711yiv9215068126 #ygrps-yiv-1643947711yiv9215068126photos div { float:left;width:72px;} #ygrps-yiv-1643947711 #ygrps-yiv-1643947711yiv9215068126 #ygrps-yiv-1643947711yiv9215068126photos div div { border:1px solid #666666;min-height:62px;overflow:hidden;width:62px;} #ygrps-yiv-1643947711 #ygrps-yiv-1643947711yiv9215068126 #ygrps-yiv-1643947711yiv9215068126photos div label { color:#666666;font-size:10px;overflow:hidden;text-align:center;white-space:nowrap;width:64px;} #ygrps-yiv-1643947711 #ygrps-yiv-1643947711yiv9215068126 #ygrps-yiv-1643947711yiv9215068126reco-category { font-size:77%;} #ygrps-yiv-1643947711 #ygrps-yiv-1643947711yiv9215068126 #ygrps-yiv-1643947711yiv9215068126reco-desc { font-size:77%;} #ygrps-yiv-1643947711 #ygrps-yiv-1643947711yiv9215068126 .ygrps-yiv-1643947711yiv9215068126replbq { margin:4px;} #ygrps-yiv-1643947711 #ygrps-yiv-1643947711yiv9215068126 #ygrps-yiv-1643947711yiv9215068126ygrp-actbar div a:first-child { margin-right:2px;padding-right:5px;} #ygrps-yiv-1643947711 #ygrps-yiv-1643947711yiv9215068126 #ygrps-yiv-1643947711yiv9215068126ygrp-mlmsg { font-size:13px;font-family:Arial, helvetica, clean, sans-serif;} #ygrps-yiv-1643947711 #ygrps-yiv-1643947711yiv9215068126 #ygrps-yiv-1643947711yiv9215068126ygrp-mlmsg table { font-size:inherit;font:100%;} #ygrps-yiv-1643947711 #ygrps-yiv-1643947711yiv9215068126 #ygrps-yiv-1643947711yiv9215068126ygrp-mlmsg select, #ygrps-yiv-1643947711 #ygrps-yiv-1643947711yiv9215068126 input, #ygrps-yiv-1643947711 #ygrps-yiv-1643947711yiv9215068126 textarea { font:99% Arial, Helvetica, clean, sans-serif;} #ygrps-yiv-1643947711 #ygrps-yiv-1643947711yiv9215068126 #ygrps-yiv-1643947711yiv9215068126ygrp-mlmsg pre, #ygrps-yiv-1643947711 #ygrps-yiv-1643947711yiv9215068126 code { font:115% monospace;} #ygrps-yiv-1643947711 #ygrps-yiv-1643947711yiv9215068126 #ygrps-yiv-1643947711yiv9215068126ygrp-mlmsg * { line-height:1.22em;} #ygrps-yiv-1643947711 #ygrps-yiv-1643947711yiv9215068126 #ygrps-yiv-1643947711yiv9215068126ygrp-mlmsg #ygrps-yiv-1643947711yiv9215068126logo { padding-bottom:10px;} #ygrps-yiv-1643947711 #ygrps-yiv-1643947711yiv9215068126 #ygrps-yiv-1643947711yiv9215068126ygrp-msg p a { font-family:Verdana;} #ygrps-yiv-1643947711 #ygrps-yiv-1643947711yiv9215068126 #ygrps-yiv-1643947711yiv9215068126ygrp-msg p#ygrps-yiv-1643947711yiv9215068126attach-count span { color:#1E66AE;font-weight:700;} #ygrps-yiv-1643947711 #ygrps-yiv-1643947711yiv9215068126 #ygrps-yiv-1643947711yiv9215068126ygrp-reco #ygrps-yiv-1643947711yiv9215068126reco-head { color:#ff7900;font-weight:700;} #ygrps-yiv-1643947711 #ygrps-yiv-1643947711yiv9215068126 #ygrps-yiv-1643947711yiv9215068126ygrp-reco { margin-bottom:20px;padding:0px;} #ygrps-yiv-1643947711 #ygrps-yiv-1643947711yiv9215068126 #ygrps-yiv-1643947711yiv9215068126ygrp-sponsor #ygrps-yiv-1643947711yiv9215068126ov li a { font-size:130%;text-decoration:none;} #ygrps-yiv-1643947711 #ygrps-yiv-1643947711yiv9215068126 #ygrps-yiv-1643947711yiv9215068126ygrp-sponsor #ygrps-yiv-1643947711yiv9215068126ov li { font-size:77%;list-style-type:square;padding:6px 0;} #ygrps-yiv-1643947711 #ygrps-yiv-1643947711yiv9215068126 #ygrps-yiv-1643947711yiv9215068126ygrp-sponsor #ygrps-yiv-1643947711yiv9215068126ov ul { margin:0;padding:0 0 0 8px;} #ygrps-yiv-1643947711 #ygrps-yiv-1643947711yiv9215068126 #ygrps-yiv-1643947711yiv9215068126ygrp-text { font-family:Georgia;} #ygrps-yiv-1643947711 #ygrps-yiv-1643947711yiv9215068126 #ygrps-yiv-1643947711yiv9215068126ygrp-text p { margin:0 0 1em 0;} #ygrps-yiv-1643947711 #ygrps-yiv-1643947711yiv9215068126 #ygrps-yiv-1643947711yiv9215068126ygrp-text tt { font-size:120%;} #ygrps-yiv-1643947711 #ygrps-yiv-1643947711yiv9215068126 #ygrps-yiv-1643947711yiv9215068126ygrp-vital ul li:last-child { border-right:none !important;} #ygrps-yiv-1643947711 '

' Unfortunately, no. I have been calling Southland for months and only get a voicemail and cannot leave a message. I am planning to call serv-aero again just to see if they can help. I'm guessing that the isolators are just a modification of an existing Lord mount. I can't imagine them being custom made. If I can find out what the starting PN is I can make the mods. The ones on my plane are about done so I will have to do something soon. Let me know if you come up with anything. 
Matt

On Thursday, November 8, 2018, 4:01:39 PM EST, tom kottre kottre@yahoo.com [fairchildclub] wrote:

Hi,Did you ever get the engine mount isolaters?TomN89J On Thursday, October 26, 2017, 3:57:34 AM AKDT, Matthew & Patricia Banks flyingbanks@yahoo.com [fairchildclub] wrote:

 
John ...Let me know how you make out on the mounts... I may want to get in line for a set as well. 
MattN4263S

From: "jamietreat jamietreat@q.com [fairchildclub]"
To: fairchildclub@yahoogroups.com
Sent: Wednesday, October 25, 2017 9:08 AM
Subject: Re: [fairchildclub] Jacobs 755 Serv-Aero mount isolation




908-459-5858
Southland manuf in NJ  Larry Trumpore and son. Both have health issues. Keep calling.
Sent via the Samsung Galaxy S7, an AT&T 4G LTE smartphone
-------- Original message --------From: "John Armbrust krossbow@comcast.net [fairchildclub]" Date: 10/24/17 10:26 AM (GMT-06:00) To: fairchildclub@yahoogroups.com Subject: Re: [fairchildclub] Jacobs 755 Serv-Aero mount isolation
  Jamie,
Which Southland Manufacturing? Do you know what city they are in?

John Armbrust
On Oct 24, 2017, at 08:50, jamietreat jamietreat@q.com [fairchildclub] wrote:

  Southland manuf has the bushings


Sent via the Samsung Galaxy S7, an AT&T 4G LTE smartphone
-------- Original message --------From: "Matthew & Patricia Banks flyingbanks@yahoo.com [fairchildclub]" Date: 10/24/17 6:38 AM (GMT-06:00) To: fairchildclub@yahoogroups.com Subject: Re: [fairchildclub] Jacobs 755 Serv-Aero mount isolation
  I have the same setup John. A few years ago I recall someone here on the group saying that they were working on replacement isolators. They were trying to find a suitable rubber. I also think there was some conversation about how the original mounts were installed. It may not be a simple replacement. The Serv-Aero guys are still around but I have talked to them and they don't support the mount any more. Hopefully you get some responses because I know the day is coming when I will have to do something with mine as well. 
MattN4263S

From: "krossbow@comcast.net [fairchildclub]"
To: fairchildclub@yahoogroups.com
Sent: Monday, October 23, 2017 7:14 AM
Subject: [fairchildclub] Jacobs 755 Serv-Aero mount isolation



Good morning,
I have a 24 with the Jake installed on a Serv-Aero engine mount. The rubber isolation mounts where it attaches to the airframe at the firewall are starting to go. Anybody run across a source for new rubber isolation mounts?
Thanks in advance!
John









'