Fairchild Club Forum

Posted: **Wed May 11, 2011 2:28 pm**

'Old Rhinebec Aerodrome has one in thier Albatross DVa.

--- On Wed, 5/11/11, Bob Webster wrote:

From: Bob Webster
Subject: Re: [fairchildclub] Potential Ranger Engine for Fokker DVII Project
To: fairchildclub@yahoogroups.com
Date: Wednesday, May 11, 2011, 4:16 PM

John Ferrero (J&C Aircraft Engines) converted one for a Bristol Fighter (I think it was) replica. John is working his way out of the business - getting old like me - but he knows how to upright a Ranger.

Bob

----- Original Message -----

From: jameslbryan@btopenworld.com

To: fairchildclub@yahoogroups.com

Sent: Wednesday, May 11, 2011 2:08 PM

Subject: Re: [fairchildclub] Potential Ranger Engine for Fokker DVII Project

Hi Paul

I am sure some one will know how to make a ranger engine run the wrong way up!!

I am sure some one used to run a Ranger in a dragster ?

G-RGUS will be over on Saturday for you to have a play with.

Good luck in your quest

James

________________________________

From: Paul Ford

To: fairchildclub@yahoogroups.com

Sent: Wednesday, 11 May, 2011 19:12:53

Subject: [fairchildclub] Potential Ranger Engine for Fokker DVII Project

Hello

I am a new member of your group & very pleased to be here. I have not joined any

group before, so am a complete newbie.

I am based in the UK, and I own and operate a full scale replica Fokker DRI

(G-FOKK) which I scratch built using Ron Sands plans.

I am at the very early stages of deciding whether or not to use a Ranger engine

in one of my projects, a full scale replica of a Fokker DVII. I am scratch

building it from plans.

I have joined the group because I understand the members have a huge range of

expertise on this particular engine, and hope that I can learn more to help in

my decision.

I am told that I am better at building aircraft than I am at mastering the

internet, so please be patient with me while I learn the ropes here!

Grateful thanks

Paul

[Non-text portions of this message have been removed]

----------------------------------------------------------

No virus found in this message.

Checked by AVG - www.avg.com

Version: 10.0.1325 / Virus Database: 1500/3630 - Release Date: 05/11/11

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]

'

Posted: **Wed May 11, 2011 3:44 pm**

'I did hear from a friend of mine, who lives if Kansas City Kansas, that during
the late 40's, Ranger motors were used in race cars. They were mounted upside
down, and the RPM's that they were turning would scare the crap out of any that
happened to be flying behind that motor at the time. I don't know who you could
contact, most all of my friends from that era have passed.
I knew, in the early 70's, there was a gentleman at StateLine airport, south
Kansas City, who was building a DVII and had intensions of putting an upside
down Ranger in it. I don't know what ever became of that project. I did see a
completed top wing and a fuselage. Name... I really don't remember a name.
Someone in EAA around K.C. may remember.
Bob

________________________________
From: Neil Baughman
To: fairchildclub@yahoogroups.com
Sent: Wed, May 11, 2011 1:28:27 PM
Subject: Re: [fairchildclub] Potential Ranger Engine for Fokker DVII Project

Old Rhinebec Aerodrome has one in thier Albatross DVa.

--- On Wed, 5/11/11, Bob Webster wrote:

From: Bob Webster
Subject: Re: [fairchildclub] Potential Ranger Engine for Fokker DVII Project
To: fairchildclub@yahoogroups.com
Date: Wednesday, May 11, 2011, 4:16 PM

John Ferrero (J&C Aircraft Engines) converted one for a Bristol Fighter (I think
it was) replica. John is working his way out of the business - getting old like
me - but he knows how to upright a Ranger.

Bob

----- Original Message -----

From: jameslbryan@btopenworld.com

To: fairchildclub@yahoogroups.com

Sent: Wednesday, May 11, 2011 2:08 PM

Subject: Re: [fairchildclub] Potential Ranger Engine for Fokker DVII Project

Hi Paul

I am sure some one will know how to make a ranger engine run the wrong way up!!

I am sure some one used to run a Ranger in a dragster ?

G-RGUS will be over on Saturday for you to have a play with.

Good luck in your quest

James

________________________________

From: Paul Ford

To: fairchildclub@yahoogroups.com

Sent: Wednesday, 11 May, 2011 19:12:53

Subject: [fairchildclub] Potential Ranger Engine for Fokker DVII Project

Hello

I am a new member of your group & very pleased to be here. I have not joined any

group before, so am a complete newbie.

I am based in the UK, and I own and operate a full scale replica Fokker DRI

(G-FOKK) which I scratch built using Ron Sands plans.

I am at the very early stages of deciding whether or not to use a Ranger engine

in one of my projects, a full scale replica of a Fokker DVII. I am scratch

building it from plans.

I have joined the group because I understand the members have a huge range of

expertise on this particular engine, and hope that I can learn more to help in

my decision.

I am told that I am better at building aircraft than I am at mastering the

internet, so please be patient with me while I learn the ropes here!

Grateful thanks

Paul

[Non-text portions of this message have been removed]

----------------------------------------------------------

No virus found in this message.

Checked by AVG - www.avg.com

Version: 10.0.1325 / Virus Database: 1500/3630 - Release Date: 05/11/11

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]

'

Posted: **Wed May 11, 2011 5:47 pm**

'Paul,

This has been discussed on the "aerodrome" forum (www.theaerodrome.com) quite a lot. The general concensusis the Ranger just doesn't have enough power to fly a full-scale D.VII replica well. You will be disappointed with its performance. It will be underpowered. I have heard this from the guys at The Vintage Aviator (NZ guys) as well.

To: fairchildclub@yahoogroups.com
From: jastabinksaviation@yahoo.com
Date: Wed, 11 May 2011 18:12:53 +0000
Subject: [fairchildclub] Potential Ranger Engine for Fokker DVII Project

Hello

I am a new member of your group & very pleased to be here. I have not joined any group before, so am a complete newbie.

I am based in the UK, and I own and operate a full scale replica Fokker DRI (G-FOKK) which I scratch built using Ron Sands plans.

I am at the very early stages of deciding whether or not to use a Ranger engine in one of my projects, a full scale replica of a Fokker DVII. I am scratch building it from plans.

I have joined the group because I understand the members have a huge range of expertise on this particular engine, and hope that I can learn more to help in my decision.

I am told that I am better at building aircraft than I am at mastering the internet, so please be patient with me while I learn the ropes here!

Grateful thanks

Paul

[Non-text portions of this message have been removed]'

Posted: **Wed May 11, 2011 5:56 pm**

'All,

The club has a few pics of the Ranger powered Dragster. Also happens my next door at the Airpark has a completely restored Ranger Dragster in his collection.
Hope to see it this summer. Car sits in one of his garages in Calif. Also has a Salt Flat racer made out of a 600 gal fuel tank from a F-100 Super Saber.

JST

Jamie S. Treat
Aircraft Restoration & Repair, LLC
Fairchild Club CD ROM Editor
IAC 5, Chapter President
http://iac5.org
Kelly Airpark (CO15)
http://www.kellyairpark.com
24201 David C. Johnson Loop
Elbert, CO 80106

Hm/Hgr 303-648-0130
Cell 303-304-7937

Quote of the Month: I hope you either take up parachute jumping or stay out of single motored airplanes at night.
- Charles A. Lindbergh, to Wiley Post 1931

----- Original Message -----
From: Robert Etter
To: fairchildclub@yahoogroups.com
Sent: Wednesday, May 11, 2011 2:44 PM
Subject: Re: [fairchildclub] Potential Ranger Engine for Fokker DVII Project

I did hear from a friend of mine, who lives if Kansas City Kansas, that during
the late 40's, Ranger motors were used in race cars. They were mounted upside
down, and the RPM's that they were turning would scare the crap out of any that
happened to be flying behind that motor at the time. I don't know who you could
contact, most all of my friends from that era have passed.
I knew, in the early 70's, there was a gentleman at StateLine airport, south
Kansas City, who was building a DVII and had intensions of putting an upside
down Ranger in it. I don't know what ever became of that project. I did see a
completed top wing and a fuselage. Name... I really don't remember a name.
Someone in EAA around K.C. may remember.
Bob

________________________________
From: Neil Baughman
To: fairchildclub@yahoogroups.com
Sent: Wed, May 11, 2011 1:28:27 PM
Subject: Re: [fairchildclub] Potential Ranger Engine for Fokker DVII Project

Old Rhinebec Aerodrome has one in thier Albatross DVa.

--- On Wed, 5/11/11, Bob Webster wrote:

From: Bob Webster
Subject: Re: [fairchildclub] Potential Ranger Engine for Fokker DVII Project
To: fairchildclub@yahoogroups.com
Date: Wednesday, May 11, 2011, 4:16 PM

John Ferrero (J&C Aircraft Engines) converted one for a Bristol Fighter (I think
it was) replica. John is working his way out of the business - getting old like
me - but he knows how to upright a Ranger.

Bob

----- Original Message -----

From: jameslbryan@btopenworld.com

To: fairchildclub@yahoogroups.com

Sent: Wednesday, May 11, 2011 2:08 PM

Subject: Re: [fairchildclub] Potential Ranger Engine for Fokker DVII Project

Hi Paul

I am sure some one will know how to make a ranger engine run the wrong way up!!

I am sure some one used to run a Ranger in a dragster ?

G-RGUS will be over on Saturday for you to have a play with.

Good luck in your quest

James

________________________________

From: Paul Ford

To: fairchildclub@yahoogroups.com

Sent: Wednesday, 11 May, 2011 19:12:53

Subject: [fairchildclub] Potential Ranger Engine for Fokker DVII Project

Hello

I am a new member of your group & very pleased to be here. I have not joined any

group before, so am a complete newbie.

I am based in the UK, and I own and operate a full scale replica Fokker DRI

(G-FOKK) which I scratch built using Ron Sands plans.

I am at the very early stages of deciding whether or not to use a Ranger engine

in one of my projects, a full scale replica of a Fokker DVII. I am scratch

building it from plans.

I have joined the group because I understand the members have a huge range of

expertise on this particular engine, and hope that I can learn more to help in

my decision.

I am told that I am better at building aircraft than I am at mastering the

internet, so please be patient with me while I learn the ropes here!

Grateful thanks

Paul

[Non-text portions of this message have been removed]

----------------------------------------------------------

No virus found in this message.

Checked by AVG - www.avg.com

Version: 10.0.1325 / Virus Database: 1500/3630 - Release Date: 05/11/11

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]

'

Posted: **Wed May 11, 2011 11:25 pm**

'I suspect that although the originals had 160-180HP and the Ranger is rated
at 200HP it really isn't developing that at the RPMs available with the
standard props being used. And if they are running something close to an
original Fokker prop and turning the same RPMs, a Ranger is only going to
develop something around 100-125 HP.

On Wed, May 11, 2011 at 4:40 PM, Derek Staha wrote:

>
> Paul,
>
> This has been discussed on the "aerodrome" forum (www.theaerodrome.com)
> quite a lot. The general concensusis the Ranger just doesn't have enough
> power to fly a full-scale D.VII replica well. You will be disappointed with
> its performance. It will be underpowered. I have heard this from the guys
> at The Vintage Aviator (NZ guys) as well.
>
>
>
> To: fairchildclub@yahoogroups.com
> From: jastabinksaviation@yahoo.com
> Date: Wed, 11 May 2011 18:12:53 +0000
> Subject: [fairchildclub] Potential Ranger Engine for Fokker DVII Project
>
>
>
>
>
>
> Hello
>
> I am a new member of your group & very pleased to be here. I have not
> joined any group before, so am a complete newbie.
>
> I am based in the UK, and I own and operate a full scale replica Fokker DRI
> (G-FOKK) which I scratch built using Ron Sands plans.
>
> I am at the very early stages of deciding whether or not to use a Ranger
> engine in one of my projects, a full scale replica of a Fokker DVII. I am
> scratch building it from plans.
>
> I have joined the group because I understand the members have a huge range
> of expertise on this particular engine, and hope that I can learn more to
> help in my decision.
>
> I am told that I am better at building aircraft than I am at mastering the
> internet, so please be patient with me while I learn the ropes here!
>
> Grateful thanks
>
> Paul
>
>
>
>
>
> [Non-text portions of this message have been removed]
>
>
>
> ------------------------------------
>
> Yahoo! Groups Links
>
>
>
>

--
Curt Kinchen
ptcurt@gmail.com

[Non-text portions of this message have been removed]

'

Posted: **Thu May 12, 2011 7:02 am**

'Possibly that Curt. The Aerodrome folks were talking about how poorly the
"smaller" props performed on some of the birds built for "The Blue Max" even
though the new engines were rated at higher horsepower than the oringinal
Daimlers. The old WWI birds all used HUGE props, moving a lot of air but at
relatively low RPM's. To do that I'm guessing the old engines were
long-stroked (under-square) beasts that produced enormous torque in a narrow
RPM range.

Ranger Mike

----- Original Message -----
From: "Curt Kinchen"
To:
Sent: Wednesday, May 11, 2011 10:25 PM
Subject: Re: [fairchildclub] Potential Ranger Engine for Fokker DVII Project

>I suspect that although the originals had 160-180HP and the Ranger is rated
> at 200HP it really isn't developing that at the RPMs available with the
> standard props being used. And if they are running something close to an
> original Fokker prop and turning the same RPMs, a Ranger is only going to
> develop something around 100-125 HP.
>
>
> On Wed, May 11, 2011 at 4:40 PM, Derek Staha wrote:
>
>>
>> Paul,
>>
>> This has been discussed on the "aerodrome" forum (www.theaerodrome.com)
>> quite a lot. The general concensusis the Ranger just doesn't have enough
>> power to fly a full-scale D.VII replica well. You will be disappointed
>> with
>> its performance. It will be underpowered. I have heard this from the
>> guys
>> at The Vintage Aviator (NZ guys) as well.
>>
>>
>>
>> To: fairchildclub@yahoogroups.com
>> From: jastabinksaviation@yahoo.com
>> Date: Wed, 11 May 2011 18:12:53 +0000
>> Subject: [fairchildclub] Potential Ranger Engine for Fokker DVII Project
>>
>>
>>
>>
>>
>>
>> Hello
>>
>> I am a new member of your group & very pleased to be here. I have not
>> joined any group before, so am a complete newbie.
>>
>> I am based in the UK, and I own and operate a full scale replica Fokker
>> DRI
>> (G-FOKK) which I scratch built using Ron Sands plans.
>>
>> I am at the very early stages of deciding whether or not to use a Ranger
>> engine in one of my projects, a full scale replica of a Fokker DVII. I am
>> scratch building it from plans.
>>
>> I have joined the group because I understand the members have a huge
>> range
>> of expertise on this particular engine, and hope that I can learn more to
>> help in my decision.
>>
>> I am told that I am better at building aircraft than I am at mastering
>> the
>> internet, so please be patient with me while I learn the ropes here!
>>
>> Grateful thanks
>>
>> Paul
>>
>>
>>
>>
>>
>> [Non-text portions of this message have been removed]
>>
>>
>>
>> ------------------------------------
>>
>> Yahoo! Groups Links
>>
>>
>>
>>
>
>
> --
> Curt Kinchen
> ptcurt@gmail.com
>
>
> [Non-text portions of this message have been removed]
>
>
>
> ------------------------------------
>
> Yahoo! Groups Links
>
>
>
>

'

Posted: **Thu May 12, 2011 9:34 am**

'The early engines were not necessarly "long stroke", they were just
huge, like about 1,000 cubic inches. The Ranger would be marginal for a
Fokker D7, and so replica builders use the Gypsy engine from the UK.
http://en.wikipedia.org/wiki/De_Havilland_Gipsy_Queen
They are larger displacement than the ranger. The Blue Max D7s used the
Gipsy Queen engines.
Jan

Mike Danielle wrote:

> Possibly that Curt. The Aerodrome folks were talking about how poorly the
> "smaller" props performed on some of the birds built for "The Blue
> Max" even
> though the new engines were rated at higher horsepower than the oringinal
> Daimlers. The old WWI birds all used HUGE props, moving a lot of air
> but at
> relatively low RPM's. To do that I'm guessing the old engines were
> long-stroked (under-square) beasts that produced enormous torque in a
> narrow
> RPM range.
>
> Ranger Mike
> ----- Original Message -----
> From: "Curt Kinchen"
> To: >
> Sent: Wednesday, May 11, 2011 10:25 PM
> Subject: Re: [fairchildclub] Potential Ranger Engine for Fokker DVII
> Project
>
> >I suspect that although the originals had 160-180HP and the Ranger is
> rated
> > at 200HP it really isn't developing that at the RPMs available with the
> > standard props being used. And if they are running something close to an
> > original Fokker prop and turning the same RPMs, a Ranger is only
> going to
> > develop something around 100-125 HP.
> >
> >
> > On Wed, May 11, 2011 at 4:40 PM, Derek Staha > wrote:
> >
> >>
> >> Paul,
> >>
> >> This has been discussed on the "aerodrome" forum (www.theaerodrome.com)
> >> quite a lot. The general concensusis the Ranger just doesn't have
> enough
> >> power to fly a full-scale D.VII replica well. You will be disappointed
> >> with
> >> its performance. It will be underpowered. I have heard this from the
> >> guys
> >> at The Vintage Aviator (NZ guys) as well.
> >>
> >>
> >>
> >> To: fairchildclub@yahoogroups.com
>
> >> From: jastabinksaviation@yahoo.com
>
> >> Date: Wed, 11 May 2011 18:12:53 +0000
> >> Subject: [fairchildclub] Potential Ranger Engine for Fokker DVII
> Project
> >>
> >>
> >>
> >>
> >>
> >>
> >> Hello
> >>
> >> I am a new member of your group & very pleased to be here. I have not
> >> joined any group before, so am a complete newbie.
> >>
> >> I am based in the UK, and I own and operate a full scale replica
> Fokker
> >> DRI
> >> (G-FOKK) which I scratch built using Ron Sands plans.
> >>
> >> I am at the very early stages of deciding whether or not to use a
> Ranger
> >> engine in one of my projects, a full scale replica of a Fokker
> DVII. I am
> >> scratch building it from plans.
> >>
> >> I have joined the group because I understand the members have a huge
> >> range
> >> of expertise on this particular engine, and hope that I can learn
> more to
> >> help in my decision.
> >>
> >> I am told that I am better at building aircraft than I am at mastering
> >> the
> >> internet, so please be patient with me while I learn the ropes here!
> >>
> >> Grateful thanks
> >>
> >> Paul
> >>
> >>
> >>
> >>
> >>
> >> [Non-text portions of this message have been removed]
> >>
> >>
> >>
> >> ------------------------------------
> >>
> >> Yahoo! Groups Links
> >>
> >>
> >>
> >>
> >
> >
> > --
> > Curt Kinchen
> > ptcurt@gmail.com
> >
> >
> > [Non-text portions of this message have been removed]
> >
> >
> >
> > ------------------------------------
> >
> > Yahoo! Groups Links
> >
> >
> >
> >
>
>

'

Posted: **Thu May 12, 2011 12:54 pm**

'Paul,

Contact Andy Parks at Vintage Aero Flying Museum. He has a Ranger in his D-VII. It is plumbed and installed upside down. He had a lot of trouble at first, including minimal power and poor Center of Gravity. The original engine not only had massive cubic inches, but also had a LOT of weight. He has had the engine rebuilt and now has plenty of power. I think he may be having some engine problems still. He flys stuff every week at 5,000 foot elevation, so he needs more power than us 'flat landers'.

Andy is at: http://www.vafm.org/

They sell a wonderful video titled "Dawn Patrol", about their flight to Dayton Ohio. The vidoe is worth purchasing, even if you don't have a Fokker D-VII.

Bob Waldron
1939 Fairchild 24K
Webster, Minnesota USA
NC18681 at HotMail dot com

--- In fairchildclub@yahoogroups.com, "Paul Ford" wrote:
>
> Hello
>
> I am a new member of your group & very pleased to be here. I have not joined any group before, so am a complete newbie.
>
> I am based in the UK, and I own and operate a full scale replica Fokker DRI (G-FOKK) which I scratch built using Ron Sands plans.
>
> I am at the very early stages of deciding whether or not to use a Ranger engine in one of my projects, a full scale replica of a Fokker DVII. I am scratch building it from plans.
>
> I have joined the group because I understand the members have a huge range of expertise on this particular engine, and hope that I can learn more to help in my decision.
>
> I am told that I am better at building aircraft than I am at mastering the internet, so please be patient with me while I learn the ropes here!
>
> Grateful thanks
>
> Paul
>

'

Posted: **Thu May 12, 2011 8:19 pm**

'Welcome Paul.
To make the info short. When I had my PT 26 I delved into Ranger
operation and was able to pull
out of the company library info on any engine manufactured for
Aircraft. (I worked in Wright Aero Engineering Dept.) Through contacts
with the guys into old birds I was told that the Rangers were only good
for about 200 hrs operating in the inverted position. However the
Masters may have solved the problem by now.
Note. Pensacola Naval Air Museum has a D7 reproduction. The Navy had
150 of them after WWI. Just Info.

BO. Flying Circus Airshows. Bealeton VA.

On 5/12/2011 2:54 PM, Bob wrote:
>
> Paul,
>
> Contact Andy Parks at Vintage Aero Flying Museum. He has a Ranger in
> his D-VII. It is plumbed and installed upside down. He had a lot of
> trouble at first, including minimal power and poor Center of Gravity.
> The original engine not only had massive cubic inches, but also had a
> LOT of weight. He has had the engine rebuilt and now has plenty of
> power. I think he may be having some engine problems still. He flys
> stuff every week at 5,000 foot elevation, so he needs more power than
> us 'flat landers'.
>
> Andy is at: http://www.vafm.org/
>
> They sell a wonderful video titled "Dawn Patrol", about their flight
> to Dayton Ohio. The vidoe is worth purchasing, even if you don't have
> a Fokker D-VII.
>
> Bob Waldron
> 1939 Fairchild 24K
> Webster, Minnesota USA
> NC18681 at HotMail dot com
>
> --- In fairchildclub@yahoogroups.com
> , "Paul Ford"
> wrote:
> >
> > Hello
> >
> > I am a new member of your group & very pleased to be here. I have
> not joined any group before, so am a complete newbie.
> >
> > I am based in the UK, and I own and operate a full scale replica
> Fokker DRI (G-FOKK) which I scratch built using Ron Sands plans.
> >
> > I am at the very early stages of deciding whether or not to use a
> Ranger engine in one of my projects, a full scale replica of a Fokker
> DVII. I am scratch building it from plans.
> >
> > I have joined the group because I understand the members have a huge
> range of expertise on this particular engine, and hope that I can
> learn more to help in my decision.
> >
> > I am told that I am better at building aircraft than I am at
> mastering the internet, so please be patient with me while I learn the
> ropes here!
> >
> > Grateful thanks
> >
> > Paul
> >
>
>

[Non-text portions of this message have been removed]

'

Posted: **Mon May 16, 2011 10:13 am**

'Dear Richard

Many apologies for the delay in responding to you.

Thanks very much for your email, we have visited the VAFM website & watched the
trailer for their video. Fantastic!

Best wishes,
Paul

________________________________
From: "OldOOwl@aol.com"
To: fairchildclub@yahoogroups.com
Sent: Wed, 11 May, 2011 20:01:49
Subject: Re: [fairchildclub] Potential Ranger Engine for Fokker DVII Project

Vintage Aero Flying Museum has one flying with a Ranger. They can provide
information you might need. _www.vafm.org_ (http://www.vafm.org)
Richard Hawley

In a message dated 5/11/2011 12:13:06 P.M. Mountain Daylight Time,
jastabinksaviation@yahoo.com writes:

Hello

I am a new member of your group & very pleased to be here. I have not
joined any group before, so am a complete newbie.

I am based in the UK, and I own and operate a full scale replica Fokker
DRI (G-FOKK) which I scratch built using Ron Sands plans.

I am at the very early stages of deciding whether or not to use a Ranger
engine in one of my projects, a full scale replica of a Fokker DVII. I am
scratch building it from plans.

I have joined the group because I understand the members have a huge range
of expertise on this particular engine, and hope that I can learn more to
help in my decision.

I am told that I am better at building aircraft than I am at mastering the
internet, so please be patient with me while I learn the ropes here!

Grateful thanks

Paul

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]'

Fairchild Club Forum

Re: Potential Ranger Engine for Fokker DVII Project

Re: Potential Ranger Engine for Fokker DVII Project

Re: Potential Ranger Engine for Fokker DVII Project

Re: Potential Ranger Engine for Fokker DVII Project

Re: Potential Ranger Engine for Fokker DVII Project

Re: Potential Ranger Engine for Fokker DVII Project

Re: Potential Ranger Engine for Fokker DVII Project

Re: Potential Ranger Engine for Fokker DVII Project

Re: Potential Ranger Engine for Fokker DVII Project

Re: Potential Ranger Engine for Fokker DVII Project

Re: Potential Ranger Engine for Fokker DVII Project