Page 2 of 2

Re: Mineral oil for normal operations in a Ranger?

Posted: Sun Feb 20, 2011 3:13 pm
by Bob
'I use Phillips XC. 25-65 in the summer, 15-50 the rest of the year. My oil consumption is a little less than 1 quart per hour. It will consume more that a quart per hour, if I speed up.

Bob W
Fairchild 24K
Webster, MN

--- In fairchildclub@yahoogroups.com, "dc871f" wrote:
>
>
>
> So do all you guys run straight mineral oil for normal ops, or AD oil?
>
'

Re: Mineral oil for normal operations in a Ranger?

Posted: Mon Feb 21, 2011 7:35 pm
by Curt Kinchen
'25w60 all the time...Used regular(not straight min) Aeroshell 120 for many
years as well. Just easier to pour the multi-vis in the cooler weather:)
MMO too, cus it smells good and does appear to prevent carbon fouling and
stuck rings.

1qt plus per hour is normal.
On Sun, Feb 20, 2011 at 1:13 PM, Bob wrote:

>
>
> I use Phillips XC. 25-65 in the summer, 15-50 the rest of the year. My oil
> consumption is a little less than 1 quart per hour. It will consume more
> that a quart per hour, if I speed up.
>
> Bob W
> Fairchild 24K
> Webster, MN
>
>
> --- In fairchildclub@yahoogroups.com, "dc871f" wrote:
> >
> >
> >
> > So do all you guys run straight mineral oil for normal ops, or AD oil?
> >
>
>
>



--
Curt Kinchen
ptcurt@gmail.com


[Non-text portions of this message have been removed]
'