Re: Fairchild Exhaust

William Creighton · Post by **William Creighton** » Tue Nov 30, 2010 2:11 pm

'Very nice, Airy!
Thanks,
Bill C.

>
> Has anyone installed single-exhaust stacks on their Ranger 6-440 engines, specifically on Fairchild 24R? 337?
> Bill C.

[Non-text portions of this message have been removed]'

Airy Millet · Post by **Airy Millet** » Tue Nov 30, 2010 2:28 pm

'and I don't tell you about the marvellous sound of the fairchild in airshows flyby!

))

Airy

To: fairchildclub@yahoogroups.com
From: crei6845@hotmail.com
Date: Tue, 30 Nov 2010 14:10:47 -0600
Subject: RE: [fairchildclub] Fairchild Exhaust

Very nice, Airy!
Thanks,
Bill C.

>
> Has anyone installed single-exhaust stacks on their Ranger 6-440 engines, specifically on Fairchild 24R? 337?
> Bill C.

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]'

William Creighton · Post by **William Creighton** » Tue Nov 30, 2010 3:41 pm

'Stuart,

I'm replacing the stamped ss three-into-one exhaust setup on my Fairchild, which experienced catastrophic failure while inroute to a antique aircraft fly-in here in Texas. I lucked out in finding a set of 3-1 cs tubular headers off a 'parts' Ranger at the fly-in FBO's hanger! Picture attached - hope you can see it...

I really like the sound and looks of individual exhaust stacks. However, without an existing 337, don't think the aesthetics are worth the hassle. Cost/fit-up are certainly simplified over a 3-1 or 6-1 setup, but we've got certified aircraft, limiting our available options. The photos Airy forwarded of single stacks looks cool! Kindly send me the dimensions of your setup so that I can evaluate that option further on my spare engine.

AMI (MN) will hopefully be fabbing my new ss tubular 3-1's this week. Need to get buttoned back up and in the air! Hoping I won't have to do too much 'adjustment' to get the flanges lined up with the exhaust studs...

Regards,
Bill C.

To: fairchildclub@yahoogroups.com
From: burgess@mweb.co.za
Date: Tue, 30 Nov 2010 08:20:10 +0200
Subject: RE: [fairchildclub] Fairchild Exhaust

Hi Bill

I have a few single stacks on the engine that will go onto my F24 project
when it is done. I am contemplating whether to fit singles or two 3 into 1
branches which I think is more common, although the look and the sound of
the singles tempt me. Bill if you need dimensions of a single stack to have
them remade, let me know and I will draw one up for you.

Cheers

Stuart

-----Original Message-----
From: fairchildclub@yahoogroups.com [mailto:fairchildclub@yahoogroups.com]
On Behalf Of Bill
Sent: 30 November 2010 05:35 AM
To: fairchildclub@yahoogroups.com
Subject: [fairchildclub] Fairchild Exhaust

Has anyone installed single-exhaust stacks on their Ranger 6-440 engines,
specifically on Fairchild 24R? 337?
Bill C.

------------------------------------

Yahoo! Groups Links

[Non-text portions of this message have been removed]'

Airy Millet · Post by **Airy Millet** » Tue Nov 30, 2010 3:54 pm

'and I remeber a company named "Aircraft Exhaust System" in the USA....what about them?
They did quite good stainless exhausts and even 3-in-1 for Rangers...

> To: fairchildclub@yahoogroups.com
> From: crei6845@hotmail.com
> Date: Tue, 30 Nov 2010 15:40:41 -0600
> Subject: RE: [fairchildclub] Fairchild Exhaust
>
>
> Stuart,
>
> I'm replacing the stamped ss three-into-one exhaust setup on my Fairchild, which experienced catastrophic failure while inroute to a antique aircraft fly-in here in Texas. I lucked out in finding a set of 3-1 cs tubular headers off a 'parts' Ranger at the fly-in FBO's hanger! Picture attached - hope you can see it...
>
> I really like the sound and looks of individual exhaust stacks. However, without an existing 337, don't think the aesthetics are worth the hassle. Cost/fit-up are certainly simplified over a 3-1 or 6-1 setup, but we've got certified aircraft, limiting our available options. The photos Airy forwarded of single stacks looks cool! Kindly send me the dimensions of your setup so that I can evaluate that option further on my spare engine.
>
> AMI (MN) will hopefully be fabbing my new ss tubular 3-1's this week. Need to get buttoned back up and in the air! Hoping I won't have to do too much 'adjustment' to get the flanges lined up with the exhaust studs...
>
> Regards,
> Bill C.
>
>
>
> To: fairchildclub@yahoogroups.com
> From: burgess@mweb.co.za
> Date: Tue, 30 Nov 2010 08:20:10 +0200
> Subject: RE: [fairchildclub] Fairchild Exhaust
>
>
>
>
>
> Hi Bill
>
> I have a few single stacks on the engine that will go onto my F24 project
> when it is done. I am contemplating whether to fit singles or two 3 into 1
> branches which I think is more common, although the look and the sound of
> the singles tempt me. Bill if you need dimensions of a single stack to have
> them remade, let me know and I will draw one up for you.
>
> Cheers
>
> Stuart
>
> -----Original Message-----
> From: fairchildclub@yahoogroups.com [mailto:fairchildclub@yahoogroups.com]
> On Behalf Of Bill
> Sent: 30 November 2010 05:35 AM
> To: fairchildclub@yahoogroups.com
> Subject: [fairchildclub] Fairchild Exhaust
>
> Has anyone installed single-exhaust stacks on their Ranger 6-440 engines,
> specifically on Fairchild 24R? 337?
> Bill C.
>
> ------------------------------------
>
> Yahoo! Groups Links
>
>
>
>
>
>
> [Non-text portions of this message have been removed]
>
>
>
> ------------------------------------
>
> Yahoo! Groups Links
>
>
>

[Non-text portions of this message have been removed]'

jameslbryan@btopenworld.com · Wed Dec 01, 2010 5:17 am

'Seems to work ok .......never had any problems and neither has my friends on his
f24 aqnd sounds much better/

________________________________
From: William Creighton
To: fairchildclub@yahoogroups.com
Sent: Tuesday, 30 November, 2010 20:10:47
Subject: RE: [fairchildclub] Fairchild Exhaust

Very nice, Airy!
Thanks,
Bill C.

>
> Has anyone installed single-exhaust stacks on their Ranger 6-440 engines,
>specifically on Fairchild 24R? 337?
> Bill C.

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]'

jameslbryan@btopenworld.com · Wed Dec 01, 2010 5:23 am

'Just sent you some pics William

________________________________
From: "jameslbryan@btopenworld.com"
To: fairchildclub@yahoogroups.com
Sent: Wednesday, 1 December, 2010 11:17:34
Subject: Re: [fairchildclub] Fairchild Exhaust

Seems to work ok .......never had any problems and neither has my friends on his

f24 aqnd sounds much better/

________________________________
From: William Creighton
To: fairchildclub@yahoogroups.com
Sent: Tuesday, 30 November, 2010 20:10:47
Subject: RE: [fairchildclub] Fairchild Exhaust

Very nice, Airy!
Thanks,
Bill C.

>
> Has anyone installed single-exhaust stacks on their Ranger 6-440 engines,
>specifically on Fairchild 24R? 337?
> Bill C.

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]'

harry mackz · Post by **harry mackz** » Wed Dec 01, 2010 9:04 am

'Airy

I went to Blois a few years ago in my F24, friendly place. Maybe time for another tour next summer.

re the exhaust discussion

I have 3 into 1 stainless system from aircraft exhaust systems, WV, 10 years ago and no problems with it.

Harry

--- On Tue, 30/11/10, Airy Millet wrote:

From: Airy Millet
Subject: RE: [fairchildclub] Fairchild Exhaust
To: "fairchildlist"
Date: Tuesday, 30 November, 2010, 16:20

Pictures made in gravel strip in mountains were made in "St Remy de Provence", a strip restricted to sailplane usually.
Others pix taken all around France, from north to Corsica.

This plane is now based in "Blois", within "Aero-Passion association" (they fly, T-6, Stampe, Bucker, etc...too!)

Airy

To: fairchildclub@yahoogroups.com
From: harrymackz@yahoo.co.uk
Date: Tue, 30 Nov 2010 15:38:07 +0000
Subject: RE: [fairchildclub] Fairchild Exhaust

Nice photos Airy, whereabouts in France is that gravel strip/beach where many of the shots seem to be taken.

Harry

UC61K HB737

--- On Tue, 30/11/10, Airy Millet wrote:

From: Airy Millet
Subject: RE: [fairchildclub] Fairchild Exhaust
To: "fairchildlist"
Date: Tuesday, 30 November, 2010, 9:28

single exhausts..
http://nostalgair.free.fr/F24/FOTOF24/FOTOF24.html

To: fairchildclub@yahoogroups.com
From: crei6845@hotmail.com
Date: Tue, 30 Nov 2010 03:35:21 +0000
Subject: [fairchildclub] Fairchild Exhaust

Has anyone installed single-exhaust stacks on their Ranger 6-440 engines, specifically on Fairchild 24R? 337?
Bill C.

[Non-text portions of this message have been removed]

------------------------------------

Yahoo! Groups Links

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]

------------------------------------

Yahoo! Groups Links

[Non-text portions of this message have been removed]

'

Stuart Burgess · Post by **Stuart Burgess** » Thu Dec 02, 2010 12:40 am

'Hi Jim

I will make a plan for you ASAP

Regards

Stuart

-----Original Message-----
From: fairchildclub@yahoogroups.com [mailto:fairchildclub@yahoogroups.com] On Behalf Of james chybicki
Sent: 30 November 2010 06:13 PM
To: fairchildclub@yahoogroups.com
Subject: RE: [fairchildclub] Fairchild Exhaust

Hi Stuart
I am planning on single stacks for my UC-61K.
I have the Canadian PT-26 set up now and really don't want to cut it up!
please email me the drawings and/or dimensions
thanks!
Jim Chybicki
UC-61K 43-14964 / HB-690
jim@jetxaerospace.com

--- On Tue, 11/30/10, Stuart Burgess wrote:

From: Stuart Burgess
Subject: RE: [fairchildclub] Fairchild Exhaust
To: fairchildclub@yahoogroups.com
Date: Tuesday, November 30, 2010, 12:20 AM

Hi Bill

I have a few single stacks on the engine that will go onto my F24 project
when it is done. I am contemplating whether to fit singles or two 3 into 1
branches which I think is more common, although the look and the sound of
the singles tempt me. Bill if you need dimensions of a single stack to have
them remade, let me know and I will draw one up for you.

Cheers

Stuart

-----Original Message-----
From: fairchildclub@yahoogroups.com [mailto:fairchildclub@yahoogroups.com]
On Behalf Of Bill
Sent: 30 November 2010 05:35 AM
To: fairchildclub@yahoogroups.com
Subject: [fairchildclub] Fairchild Exhaust

Has anyone installed single-exhaust stacks on their Ranger 6-440 engines,
specifically on Fairchild 24R? 337?
Bill C.

------------------------------------

Yahoo! Groups Links

[Non-text portions of this message have been removed]

------------------------------------

Yahoo! Groups Links

'

Stuart Burgess · Post by **Stuart Burgess** » Thu Dec 02, 2010 12:41 am

'Hi Fritz

No problem. I will send to you too as soon as they are done

-----Original Message-----
From: fairchildclub@yahoogroups.com [mailto:fairchildclub@yahoogroups.com]
On Behalf Of Fritz
Sent: 30 November 2010 06:52 PM
To: fairchildclub@yahoogroups.com
Subject: RE: [fairchildclub] Fairchild Exhaust

Hello Stuart,
I would like a copy of your drawings as well.. thanks,
Fritz avdflyr@cox.net

-----Original Message-----
From: fairchildclub@yahoogroups.com [mailto:fairchildclub@yahoogroups.com]
On Behalf Of james chybicki
Sent: Tuesday, November 30, 2010 8:13 AM
To: fairchildclub@yahoogroups.com
Subject: RE: [fairchildclub] Fairchild Exhaust

Hi Stuart
I am planning on single stacks for my UC-61K.
I have the Canadian PT-26 set up now and really don't want to cut it up!
please email me the drawings and/or dimensions
thanks!
Jim Chybicki
UC-61K 43-14964 / HB-690
jim@jetxaerospace.com

--- On Tue, 11/30/10, Stuart Burgess wrote:

From: Stuart Burgess
Subject: RE: [fairchildclub] Fairchild Exhaust
To: fairchildclub@yahoogroups.com
Date: Tuesday, November 30, 2010, 12:20 AM

Hi Bill

I have a few single stacks on the engine that will go onto my F24 project
when it is done. I am contemplating whether to fit singles or two 3 into 1
branches which I think is more common, although the look and the sound of
the singles tempt me. Bill if you need dimensions of a single stack to have
them remade, let me know and I will draw one up for you.

Cheers

Stuart

-----Original Message-----
From: fairchildclub@yahoogroups.com [mailto:fairchildclub@yahoogroups.com]
On Behalf Of Bill
Sent: 30 November 2010 05:35 AM
To: fairchildclub@yahoogroups.com
Subject: [fairchildclub] Fairchild Exhaust

Has anyone installed single-exhaust stacks on their Ranger 6-440 engines,
specifically on Fairchild 24R? 337?
Bill C.

------------------------------------

Yahoo! Groups Links

[Non-text portions of this message have been removed]

------------------------------------

Yahoo! Groups Links

------------------------------------

Yahoo! Groups Links

'

Fritz · Post by **Fritz** » Thu Dec 02, 2010 12:44 am

'Thanks
Fritz

-----Original Message-----
From: fairchildclub@yahoogroups.com [mailto:fairchildclub@yahoogroups.com]
On Behalf Of Stuart Burgess
Sent: Wednesday, December 01, 2010 10:41 PM
To: fairchildclub@yahoogroups.com
Subject: RE: [fairchildclub] Fairchild Exhaust

Hi Fritz

No problem. I will send to you too as soon as they are done

-----Original Message-----
From: fairchildclub@yahoogroups.com [mailto:fairchildclub@yahoogroups.com]
On Behalf Of Fritz
Sent: 30 November 2010 06:52 PM
To: fairchildclub@yahoogroups.com
Subject: RE: [fairchildclub] Fairchild Exhaust

Hello Stuart,
I would like a copy of your drawings as well.. thanks,
Fritz avdflyr@cox.net

-----Original Message-----
From: fairchildclub@yahoogroups.com [mailto:fairchildclub@yahoogroups.com]
On Behalf Of james chybicki
Sent: Tuesday, November 30, 2010 8:13 AM
To: fairchildclub@yahoogroups.com
Subject: RE: [fairchildclub] Fairchild Exhaust

Hi Stuart
I am planning on single stacks for my UC-61K.
I have the Canadian PT-26 set up now and really don't want to cut it up!
please email me the drawings and/or dimensions
thanks!
Jim Chybicki
UC-61K 43-14964 / HB-690
jim@jetxaerospace.com

--- On Tue, 11/30/10, Stuart Burgess wrote:

From: Stuart Burgess
Subject: RE: [fairchildclub] Fairchild Exhaust
To: fairchildclub@yahoogroups.com
Date: Tuesday, November 30, 2010, 12:20 AM

Hi Bill

I have a few single stacks on the engine that will go onto my F24 project
when it is done. I am contemplating whether to fit singles or two 3 into 1
branches which I think is more common, although the look and the sound of
the singles tempt me. Bill if you need dimensions of a single stack to have
them remade, let me know and I will draw one up for you.

Cheers

Stuart

-----Original Message-----
From: fairchildclub@yahoogroups.com [mailto:fairchildclub@yahoogroups.com]
On Behalf Of Bill
Sent: 30 November 2010 05:35 AM
To: fairchildclub@yahoogroups.com
Subject: [fairchildclub] Fairchild Exhaust

Has anyone installed single-exhaust stacks on their Ranger 6-440 engines,
specifically on Fairchild 24R? 337?
Bill C.

------------------------------------

Yahoo! Groups Links

[Non-text portions of this message have been removed]

------------------------------------

Yahoo! Groups Links

------------------------------------

Yahoo! Groups Links

------------------------------------

Yahoo! Groups Links

'