Grimes Type B Tail light
Posted: Mon Oct 25, 2010 8:40 pm
'I am in need of a type B (flanged) Grimes tail light for my restoration project. The condition of the light internals is not important as I have the internal parts. I need only the body casting. If any member has a light available for sale, please provide contact information.
'>
> Hugh Loewenhardt
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
> What is the status of the project and how complete
> the many parts?
>
>
>
> Fritz
>
>
>
> San Diego, CA. 92056
>
>
>
> -----Original Message-----
>
> From: fairchildclub@yahoogroups.com
> [mailto:fairchildclub@yahoogroups.com]
>
> On Behalf Of BOB DUNN
>
> Sent: Thursday, October 07, 2010 2:17 AM
>
> To: fairchildclub@yahoogroups.com
>
> Subject: RE: [fairchildclub] Looking for a PT19 or 26
> project.
>
>
>
> Nacogdoches, Texas North of Houston & SW of
> Shreveport, Louisiana.
>
>
>
> --- On Wed, 10/6/10, Fritz
> wrote:
>
>
>
> From: Fritz
>
>
>
> Subject: RE: [fairchildclub] Looking for a PT19 or 26
> project.
>
>
>
> To: fairchildclub@yahoogroups.com
>
>
>
> Date: Wednesday, October 6, 2010, 11:08 PM
>
>
>
> Your project sounds like interesting. I am in San Diego,
> where are
>
> you?
>
>
>
> -----Original Message-----
>
>
>
> From: fairchildclub@yahoogroups.com
> [mailto:fairchildclub@yahoogroups.com]
>
>
>
> On Behalf Of BOB DUNN
>
>
>
> Sent: Wednesday, October 06, 2010 8:34 PM
>
>
>
> To: fairchildclub@yahoogroups.com
>
>
>
> Subject: Re: [fairchildclub] Looking for a PT19 or 26
> project.
>
>
>
> I have a PT-26 project I bought to rebuild for my best
> friend to fly. We
>
>
>
> were actually going to not use the canopy and make it like
> a PT-19 so we
>
>
>
> would have a pair to fly together. However, he was killed
> while checking out
>
>
>
> in a BT-13, so I've lost interest in the restoration.
>
>
>
> Everything is off the fuselage which is ready for cleaning
> ,
>
>
>
> priming/painting etc. the vertical stabilizer is ready. The
> ailerons &
>
>
>
> elevators are up through silver. The cover has been removed
> from the center
>
>
>
> section for cleaning, inspection & some rebuilding. I
> have the wood ribs
>
>
>
> already built for the cs. I was going to do a engine
> tear-down and see what
>
>
>
> it needs. Probable needs new rings...at least a top
> overhaul and a good
>
>
>
> cleaning & inspection. It came with a electric prop,
> but I would have gone
>
>
>
> back to a wood prop.The canopy is apart for cleaning,
> painting and glass
>
>
>
> replacement where needed. It has metal flaps and
> floorboards, but no heater
>
>
>
> installation. This could be added for cold climes.I am
> asking $10,000.00 but
>
>
>
> would allow $1,000.00 for transportation. You probably have
> a good idea of
>
>
>
> the size trailer and truck needed for transport. I believe
> I have most all
>
>
>
> the logs/paperwork. I wish the situation had been different
> so my friend and
>
>
>
> I could
>
>
>
> have had "twin" PT's to fly.
>
>
>
> Bob Dunn 936-564-7212 C-936-569-3287
>
>
>
> --- On Wed, 10/6/10, stinsonman2000
> wrote:
>
>
>
> From: stinsonman2000
>
>
>
> Subject: [fairchildclub] Looking for a PT19 or 26
> project.
>
>
>
> To: fairchildclub@yahoogroups.com
>
>
>
> Date: Wednesday, October 6, 2010, 7:38 PM
>
>
>
> Looking for a PT19 or 26 project. Prefer a complete plane
> but will
>
>
>
> consider what ever is available. I live in Pa. but am
> willing to travel for
>
>
>
> a good one.
>
>
>
> [Non-text portions of this message have been removed]
>
>
>
> ------------------------------------
>
>
>
> Yahoo! Groups Links
>
>
>
> [Non-text portions of this message have been removed]
>
>
>
> ------------------------------------
>
>
>
> Yahoo! Groups Links
>
>
>
> http://groups.yahoo.com/group/fairchildclub/
>
>
>
> Individual Email | Traditional
>
>
>
> http://groups.yahoo.com/group/fairchildclub/join
>
>
>
> (Yahoo! ID required)
>
>
>
> fairchildclub-digest@yahoogroups.com
>
>
>
>
> fairchildclub-fullfeatured@yahoogroups.com
>
>
>
> fairchildclub-unsubscribe@yahoogroups.com
>
>
>
> http://docs.yahoo.com/info/terms/
>
>
>
> [Non-text portions of this message have been removed]
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>