Page 2 of 2

Re: F24R46 PARTS NEEDED

Posted: Mon Apr 23, 2007 8:45 am
by james chybicki
'Hi Guys
Try this website: http://www.lebaronbonney.com
We were able to find everything we needed for handles,
window cranks, risers,....
Jim C.

--- Robert Etter wrote:
> The only thing that I can help you on is I have an
> extra front spar wing attach fitting and a coffee
> can full of bushings. They are from a military wing
> that I took apart. All or most of them are anodized
> and in good condition. I also have some pre-war
> civilian wing bushings, but most are corroded to
> some degree.
>
> ----- Original Message -----
> From: windshieldguy2000
> To: fairchildclub@yahoogroups.com
> Sent: Sunday, April 22, 2007 11:58 AM
> Subject: [fairchildclub] Re: F24R46 PARTS NEEDED
>
>
> Bob: You're right. I just looked at the drawing
> and compared it with
> some color pictures of the Studebaker interiors
> from that vintage and
> they are indeed plastic. I guess I'm now in the
> market for a set of
> plastic eusteuchon plates for a 1946 Temco built
> F-24R..... I'm also
> still shopping for a spare set of wing hardware. I
> want to build up a
> spare set of wings using Bill Scheunemann's kit
> (new spars, everything
> you need to build new ribs, including the jig, no
> hardware) without
> taking my airplane out of service for a long
> period of time. I bought
> one set of hardware several months ago (Thanks,
> Jamie), but still need
> one more set. Any leads?
>
> Many Thanks,
> Brad Donner
>
>
>
>
>
> [Non-text portions of this message have been
> removed]
>
>

__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com'

Re: F24R46 PARTS NEEDED

Posted: Fri May 11, 2007 6:51 am
by windshieldguy2000
'Bob: If you still have the bushings and attach fittings, I'd like to
buy them. How do I contact you to set that up? I'm also looking for
elevator hinge brackets - these are the triangular brackets that bolt
to the trailing edge of the horizontal stabilizer. There are four of
them - two pairs of slightly different sizes - and they are made out of
aluminum. If anyone has a spare set they'd like to sell or trade four,
please let me know.

Brad Donner
NC77605'