Fairchild Club Forum

'Hello Jim;
I need 2 nos fuel valves for my F-24. How much do you want for them? Jay Thomson

james chybicki wrote:
HI BOB-
NOT SURE YOU CAN USE THEM, BUT WE HAVE A COUPLE SETS
OF N.O.S. FAIRCHILD FUEL VALVES FOR F24'S/UC-61'S. WE
HAVE SOLD A FEW SETS TO CLUB MEMBERS AND THEY SEEM TO
WORK JUST FINE!
LET ME KNOW
JIM CHYBICKI
UC-61K HB-690 / 43-14964

--- rangerrobertmn wrote:

> Has anyone come up with a replacement for the
> Fairchild 24 Fuel
> valves. Mine is the earlier version, with the
> valves at the wing
> root. My valves have started sticking a lot.
>
> Any suggestions?
>
> Bob Waldron
> 1939 Fairchild 24 K
> Stillwater, MN
>
>
>
>
>
>
>

__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com





---------------------------------
Get your email and more, right on the new Yahoo.com

[Non-text portions of this message have been removed]'

'One Imperial fuel valve in my 24W seeps fuel. In liu of replacing it
with another questionable rebuilt Imperial valve, does anyone know if
the newer type valves, ie: Andair, Piper etc., have a more modern
valve that will physically fit in the Fairchild?

Steve Whelan'

'Hi Steve-
I have a couple sets of New Old Stock Fairchild
original Fuel Valves
If you need one or a set let me know, I have a bunch
of F24W/UC-61 parts and some F24R/UC61K that are in
excess to our UC-61K restoration. If you want a list,
let me know and I can email the entire list to you.
thanks
Jim Chybicki
UC-61K 43-14964/HB-690-ArgusIII

--- whelan7412 wrote:

> One Imperial fuel valve in my 24W seeps fuel. In liu
> of replacing it
> with another questionable rebuilt Imperial valve,
> does anyone know if
> the newer type valves, ie: Andair, Piper etc., have
> a more modern
> valve that will physically fit in the Fairchild?
>
> Steve Whelan
>
>

____________________________________________________________________________________
Never miss a thing. Make Yahoo your home page.
http://www.yahoo.com/r/hs'

'Hi Jim on a different subject I read in a past post that you were
developing a headliner pattern. I am about to the point in my
restoration to begin this task. I was wondering if you could lend me
your pattern as this would save me much time. I would be willing to
participate in any development cost you incurred. Thanks for any help
you can lend.

George Leighton

________________________________

From: fairchildclub@yahoogroups.com
[mailto:fairchildclub@yahoogroups.com] On Behalf Of james chybicki
Sent: Wednesday, January 30, 2008 8:05 AM
To: fairchildclub@yahoogroups.com
Subject: Re: [fairchildclub] Fuel Valves



Hi Steve-
I have a couple sets of New Old Stock Fairchild
original Fuel Valves
If you need one or a set let me know, I have a bunch
of F24W/UC-61 parts and some F24R/UC61K that are in
excess to our UC-61K restoration. If you want a list,
let me know and I can email the entire list to you.
thanks
Jim Chybicki
UC-61K 43-14964/HB-690-ArgusIII

--- whelan7412
wrote:

> One Imperial fuel valve in my 24W seeps fuel. In liu
> of replacing it
> with another questionable rebuilt Imperial valve,
> does anyone know if
> the newer type valves, ie: Andair, Piper etc., have
> a more modern
> valve that will physically fit in the Fairchild?
>
> Steve Whelan
>
>

__________________________________________________________
Never miss a thing. Make Yahoo your home page.
http://www.yahoo.com/r/hs





[Non-text portions of this message have been removed]'

'Jim,

Please do email me the parts you have available. I'm interested in the fuel valves as well. Be sure to include your phone number & cooordinates. Email me at: faacert@att.biz.

Many Thanks!
Steve Whelan

"Leighton, George" wrote:
Hi Jim on a different subject I read in a past post that you were
developing a headliner pattern. I am about to the point in my
restoration to begin this task. I was wondering if you could lend me
your pattern as this would save me much time. I would be willing to
participate in any development cost you incurred. Thanks for any help
you can lend.

George Leighton

________________________________

From: fairchildclub@yahoogroups.com
[mailto:fairchildclub@yahoogroups.com] On Behalf Of james chybicki
Sent: Wednesday, January 30, 2008 8:05 AM
To: fairchildclub@yahoogroups.com
Subject: Re: [fairchildclub] Fuel Valves

Hi Steve-
I have a couple sets of New Old Stock Fairchild
original Fuel Valves
If you need one or a set let me know, I have a bunch
of F24W/UC-61 parts and some F24R/UC61K that are in
excess to our UC-61K restoration. If you want a list,
let me know and I can email the entire list to you.
thanks
Jim Chybicki
UC-61K 43-14964/HB-690-ArgusIII

--- whelan7412
wrote:

> One Imperial fuel valve in my 24W seeps fuel. In liu
> of replacing it
> with another questionable rebuilt Imperial valve,
> does anyone know if
> the newer type valves, ie: Andair, Piper etc., have
> a more modern
> valve that will physically fit in the Fairchild?
>
> Steve Whelan
>
>

__________________________________________________________
Never miss a thing. Make Yahoo your home page.
http://www.yahoo.com/r/hs

[Non-text portions of this message have been removed]






---------------------------------
Never miss a thing. Make Yahoo your homepage.

[Non-text portions of this message have been removed]'

'Jim,

In addition to the fuel valves, would you happen to have an original magneto switch?

Thanks,
Steve Whelan

james chybicki wrote:
Hi Steve-
I have a couple sets of New Old Stock Fairchild
original Fuel Valves
If you need one or a set let me know, I have a bunch
of F24W/UC-61 parts and some F24R/UC61K that are in
excess to our UC-61K restoration. If you want a list,
let me know and I can email the entire list to you.
thanks
Jim Chybicki
UC-61K 43-14964/HB-690-ArgusIII

--- whelan7412 wrote:

> One Imperial fuel valve in my 24W seeps fuel. In liu
> of replacing it
> with another questionable rebuilt Imperial valve,
> does anyone know if
> the newer type valves, ie: Andair, Piper etc., have
> a more modern
> valve that will physically fit in the Fairchild?
>
> Steve Whelan
>
>

__________________________________________________________
Never miss a thing. Make Yahoo your home page.
http://www.yahoo.com/r/hs





---------------------------------
Be a better friend, newshound, and know-it-all with Yahoo! Mobile. Try it now.

[Non-text portions of this message have been removed]'

'Jim,

In addition to the fuel valves, would you happen to have an original magneto switch?

Thanks,
Steve Whelan

james chybicki wrote:
Hi Steve-
I have a couple sets of New Old Stock Fairchild
original Fuel Valves
If you need one or a set let me know, I have a bunch
of F24W/UC-61 parts and some F24R/UC61K that are in
excess to our UC-61K restoration. If you want a list,
let me know and I can email the entire list to you.
thanks
Jim Chybicki
UC-61K 43-14964/HB-690-ArgusIII

--- whelan7412 wrote:

> One Imperial fuel valve in my 24W seeps fuel. In liu
> of replacing it
> with another questionable rebuilt Imperial valve,
> does anyone know if
> the newer type valves, ie: Andair, Piper etc., have
> a more modern
> valve that will physically fit in the Fairchild?
>
> Steve Whelan
>
>

__________________________________________________________
Never miss a thing. Make Yahoo your home page.
http://www.yahoo.com/r/hs





---------------------------------
Looking for last minute shopping deals? Find them fast with Yahoo! Search.

[Non-text portions of this message have been removed]'

'Hi George
Let me get with my partner Bob Coon.
He was the mastermind behind the pattern. Our
Headliner is absolutely breathtaking ( I'll try and
load some pictures on the site , remeber, our plane is
a UC-61 with the skylight windows on top,.
I will keep you posted
thanks
Jim
--- "Leighton, George"
wrote:

> Hi Jim on a different subject I read in a past post
> that you were
> developing a headliner pattern. I am about to the
> point in my
> restoration to begin this task. I was wondering if
> you could lend me
> your pattern as this would save me much time. I
> would be willing to
> participate in any development cost you incurred.
> Thanks for any help
> you can lend.
>
> George Leighton
>
> ________________________________
>
> From: fairchildclub@yahoogroups.com
> [mailto:fairchildclub@yahoogroups.com] On Behalf Of
> james chybicki
> Sent: Wednesday, January 30, 2008 8:05 AM
> To: fairchildclub@yahoogroups.com
> Subject: Re: [fairchildclub] Fuel Valves
>
>
>
> Hi Steve-
> I have a couple sets of New Old Stock Fairchild
> original Fuel Valves
> If you need one or a set let me know, I have a bunch
> of F24W/UC-61 parts and some F24R/UC61K that are in
> excess to our UC-61K restoration. If you want a
> list,
> let me know and I can email the entire list to you.
> thanks
> Jim Chybicki
> UC-61K 43-14964/HB-690-ArgusIII
>
> --- whelan7412 >
> wrote:
>
> > One Imperial fuel valve in my 24W seeps fuel. In
> liu
> > of replacing it
> > with another questionable rebuilt Imperial valve,
> > does anyone know if
> > the newer type valves, ie: Andair, Piper etc.,
> have
> > a more modern
> > valve that will physically fit in the Fairchild?
> >
> > Steve Whelan
> >
> >
>
>

__________________________________________________________

> Never miss a thing. Make Yahoo your home page.
> http://www.yahoo.com/r/hs
>
>
>
>
>
>
> [Non-text portions of this message have been
> removed]
>
>

____________________________________________________________________________________
Be a better friend, newshound, and
know-it-all with Yahoo! Mobile. Try it now. http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ'

'Let me Check.
What year is your F24?
there apears to be a couple different versions used
between military and civilian models
Jim
--- steven whelan wrote:

> Jim,
>
> In addition to the fuel valves, would you happen
> to have an original magneto switch?
>
> Thanks,
> Steve Whelan
>
> james chybicki wrote:
> Hi Steve-
> I have a couple sets of New Old Stock Fairchild
> original Fuel Valves
> If you need one or a set let me know, I have a bunch
> of F24W/UC-61 parts and some F24R/UC61K that are in
> excess to our UC-61K restoration. If you want a
> list,
> let me know and I can email the entire list to you.
> thanks
> Jim Chybicki
> UC-61K 43-14964/HB-690-ArgusIII
>
> --- whelan7412 wrote:
>
> > One Imperial fuel valve in my 24W seeps fuel. In
> liu
> > of replacing it
> > with another questionable rebuilt Imperial valve,
> > does anyone know if
> > the newer type valves, ie: Andair, Piper etc.,
> have
> > a more modern
> > valve that will physically fit in the Fairchild?
> >
> > Steve Whelan
> >
> >
>
>

__________________________________________________________

> Never miss a thing. Make Yahoo your home page.
> http://www.yahoo.com/r/hs
>
>
>
>
>
> ---------------------------------
> Be a better friend, newshound, and know-it-all with
> Yahoo! Mobile. Try it now.
>
> [Non-text portions of this message have been
> removed]
>
>

____________________________________________________________________________________
Never miss a thing. Make Yahoo your home page.
http://www.yahoo.com/r/hs'

'Hi Jim

My plane is a 24W but I am putting in the skylight so your pattern would
work great. Thanks

George

________________________________

From: fairchildclub@yahoogroups.com
[mailto:fairchildclub@yahoogroups.com] On Behalf Of james chybicki
Sent: Thursday, January 31, 2008 8:56 AM
To: fairchildclub@yahoogroups.com
Subject: RE: [fairchildclub] Fuel Valves



Hi George
Let me get with my partner Bob Coon.
He was the mastermind behind the pattern. Our
Headliner is absolutely breathtaking ( I'll try and
load some pictures on the site , remeber, our plane is
a UC-61 with the skylight windows on top,.
I will keep you posted
thanks
Jim
--- "Leighton, George"
wrote:

> Hi Jim on a different subject I read in a past post
> that you were
> developing a headliner pattern. I am about to the
> point in my
> restoration to begin this task. I was wondering if
> you could lend me
> your pattern as this would save me much time. I
> would be willing to
> participate in any development cost you incurred.
> Thanks for any help
> you can lend.
>
> George Leighton
>
> ________________________________
>
> From: fairchildclub@yahoogroups.com

> [mailto:fairchildclub@yahoogroups.com

] On Behalf Of

> james chybicki
> Sent: Wednesday, January 30, 2008 8:05 AM
> To: fairchildclub@yahoogroups.com

> Subject: Re: [fairchildclub] Fuel Valves
>
>
>
> Hi Steve-
> I have a couple sets of New Old Stock Fairchild
> original Fuel Valves
> If you need one or a set let me know, I have a bunch
> of F24W/UC-61 parts and some F24R/UC61K that are in
> excess to our UC-61K restoration. If you want a
> list,
> let me know and I can email the entire list to you.
> thanks
> Jim Chybicki
> UC-61K 43-14964/HB-690-ArgusIII
>
> --- whelan7412 >
> wrote:
>
> > One Imperial fuel valve in my 24W seeps fuel. In
> liu
> > of replacing it
> > with another questionable rebuilt Imperial valve,
> > does anyone know if
> > the newer type valves, ie: Andair, Piper etc.,
> have
> > a more modern
> > valve that will physically fit in the Fairchild?
> >
> > Steve Whelan
> >
> >
>
>

__________________________________________________________

> Never miss a thing. Make Yahoo your home page.
> http://www.yahoo.com/r/hs
>
>
>
>
>
>
> [Non-text portions of this message have been
> removed]
>
>

__________________________________________________________
Be a better friend, newshound, and
know-it-all with Yahoo! Mobile. Try it now.
http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ







[Non-text portions of this message have been removed]'