Fairchild Club Forum

> Hi Jim;
> I have a F24R46 that we are trying to get approved
> for the 200hp
> engine. I am looking for a UC61 that has a 200hp
> Ranger in it so we
> can prove to the gestapo (faa) that the mount in the
> UC61 and the R46
> have the same part number. Is yours 200hp? Jay
>
>
>
>

----- Original Message -----
From: "Jamie S. Treat"
To:
Sent: Tuesday, April 04, 2006 4:16 AM
Subject: Re: [fairchildclub] Drawing project


> Fairchild Group,
>
> Somebody must have dug up an old email from years ago. The club does not
> have any other drawing project going on at this time. NASM turned me down
> a
> few years ago with the remainder of the drawings for the Fairchild series.
>
> What we have on the current CD ROM is the latest we have.
>
> Jamie
>
> Jamie S. Treat A&P/IA
> Aircraft Restoration & Repair
> 24201 David C. Johnson Loop
> Kelly Airpark (CO15)
> http://www.kellyairpark.com
> Elbert, CO 80106
> HM/Shop 303-648-0130
> JamieTreat@direcway.com
>
>
> ----- Original Message -----
> From:
> To:
> Sent: Monday, April 03, 2006 7:15 PM
> Subject: [fairchildclub] Drawing project
>
>
>> Hi Jamie,
>>
>> If the drawings you are working on are different than the ones I am
>> working
>> on, I would also be interested in buying the disk you are developing.
>> Never
>> enough information . We have had two cable assy built from the drawings
>> we
>> have for the L5.
>>
>> If you have an example of one of the drawings you could email, I would
>> like
>> to see one.
>>
>> The stuff I am working with is individual parts for sure and I expect
>> some
>> will be assy. with reference to individual parts.
>>
>> Gene Haines
>> 585-682-3279
>>
>>
>> [Non-text portions of this message have been removed]
>>
>>
>>
>>
>> Yahoo! Groups Links
>>
>>
>>
>>
>>
>>
>>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>