Wet vacuum pump for Ranger

An archive of all the messages posted in the old Fairchild Club Yahoo Group. It is not possible to start a new topic in this forum (please use one of the other forums for new threads), but you can continue to post on existing topics.
Post Reply
Joel
Posts: 4
Joined: Mon Mar 14, 2011 2:54 pm

Wet vacuum pump for Ranger

Post by Joel »

'Just thought I would pass this along to the group. I have been looking for a Pesco 3P-207-D wet pump for my Ranger with no luck (no core for a rebuild either). I found plenty of 207s with spline couplers but nothing with the (all important) tang coupler. Spoke to a tech at Airwolf who advised me that if the customer specifies, they will sell their 3P-194-AFE or 3P-207-AFE pumps with an optional tang coupler installed (no extra charge) and that their units are FAA approved for use as a replacement to those listed on the Ranger data sheet. Mine arrived yesterday and looks like a pretty nice unit. Anyway, throwing this out there in case anyone else is running into the same pump availability problem that I did.

Joel

Sent from my iPad'
Top
Post Reply

Return to “Yahoo Group Archives”