Re: Looking for a 24 formerly owned by Malcom Dixon of Texas

eugene.haines · Post by **eugene.haines** » Fri Dec 10, 2010 9:22 am

'I have parts of three and I am about to scrap them. A good welder could make up a complete fuselage frame. They are stripped of removable parts. Located at Albion, NY
Gene Haines
pilot4906@aol.com'

John Morton · Post by **John Morton** » Fri Dec 10, 2010 4:47 pm

'Hi Gene,

I have been swamped at work I even have to go in this weekend. I will catch up
with you this weekend.

talk soon, John.

________________________________
From: eugene.haines
To: fairchildclub@yahoogroups.com
Sent: Fri, December 10, 2010 10:22:41 AM
Subject: [fairchildclub] Fairchild PT Fuselage frame parts.

I have parts of three and I am about to scrap them. A good welder could make up
a complete fuselage frame. They are stripped of removable parts. Located at
Albion, NY
Gene Haines
pilot4906@aol.com

[Non-text portions of this message have been removed]'

John Morton · Post by **John Morton** » Sun Dec 12, 2010 2:50 pm

'Hello Gene,

I would hate to see the frames junked if they were still of some use. If you
were not in a big rush maybe I could come over to pick them up with that 182 if
you still want to part with it? This week will be still busy for me but the week
before Christmas should slow up and I can get back to rounding up your parts.

My company is still looking for mechanics, avionics, supervisors and a 145 DOM
So don't forget to tell your relation if he is still interested. you can see the
postings on www.JSFIRM.com.

Last of all I need to write up a receipt for the parts we traded for my
business. I wondered if you have a letter head or name of your organization? We
need to go over the list one more time to verify the prices we charged each
other. So I can do my taxes.

Talk soon,
John

________________________________
From: eugene.haines
To: fairchildclub@yahoogroups.com
Sent: Fri, December 10, 2010 10:22:41 AM
Subject: [fairchildclub] Fairchild PT Fuselage frame parts.

I have parts of three and I am about to scrap them. A good welder could make up
a complete fuselage frame. They are stripped of removable parts. Located at
Albion, NY
Gene Haines
pilot4906@aol.com

[Non-text portions of this message have been removed]'

Gene Haines · Post by **Gene Haines** » Sun Dec 12, 2010 4:46 pm

'If you make up the list I can type what ever you need on our letter head. Since it was a swap perhaps you don't need to make any reference to the trade for your company. Keep life simple if possible.

I would trade all the fuselage pieces and the 182 stuff for a good fuselage. A no rust one. Stripped is OK.
The ones I have are really pretty clean and the steel should be OK to use on projects.

Gene

-----Original Message-----
From: John Morton
To: fairchildclub@yahoogroups.com
Sent: Sun, Dec 12, 2010 3:50 pm
Subject: Re: [fairchildclub] Fairchild PT Fuselage frame parts.

Hello Gene,

I would hate to see the frames junked if they were still of some use. If you
were not in a big rush maybe I could come over to pick them up with that 182 if
you still want to part with it? This week will be still busy for me but the week
before Christmas should slow up and I can get back to rounding up your parts.

My company is still looking for mechanics, avionics, supervisors and a 145 DOM
So don't forget to tell your relation if he is still interested. you can see the
postings on www.JSFIRM.com.

Last of all I need to write up a receipt for the parts we traded for my
business. I wondered if you have a letter head or name of your organization? We
need to go over the list one more time to verify the prices we charged each
other. So I can do my taxes.

Talk soon,
John

________________________________
From: eugene.haines
To: fairchildclub@yahoogroups.com
Sent: Fri, December 10, 2010 10:22:41 AM
Subject: [fairchildclub] Fairchild PT Fuselage frame parts.

I have parts of three and I am about to scrap them. A good welder could make up
a complete fuselage frame. They are stripped of removable parts. Located at
Albion, NY
Gene Haines
pilot4906@aol.com

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]'

David Stroud · Post by **David Stroud** » Tue Dec 14, 2010 8:57 pm

'Trying to help a friend's family here. Does anyone know the whereabouts of a Fairchild 24
N81288 formerly owned by the deceased Malcom Dixon of the Houston, Texas area ?

Family wants to contact current owner. Seems urgent. Thanks.

David Stroud Ottawa, Canada
Christavia C-FDWS
Fairchild 51 replica
under construction C-FYXV

[Non-text portions of this message have been removed]'

Jonathan J. M. Katz · Wed Dec 15, 2010 12:38 pm

'On Tue, Dec 14, 2010 at 9:57 PM, DAVID STROUD wrote:

> Trying to help a friend's family here. Does anyone know the whereabouts of a Fairchild 24
> N81288 formerly owned by the deceased Malcom Dixon of the Houston, Texas area ?
>
> Family wants to contact current owner. Seems urgent. Thanks.

The N# goes back to Mr. Dixon, per the FAA website.'

Brett · Post by **Brett** » Tue Aug 16, 2011 6:31 am

'--- In fairchildclub@yahoogroups.com, "Jonathan J. M. Katz" wrote:

>
> On Tue, Dec 14, 2010 at 9:57 PM, DAVID STROUD wrote:
> > Trying to help a friend's family here. Does anyone know the whereabouts of a Fairchild 24
> > N81288 formerly owned by the deceased Malcom Dixon of the Houston, Texas area ?
> >
> > Family wants to contact current owner. Seems urgent. Thanks.
>
> The N# goes back to Mr. Dixon, per the FAA website.
>

I just bought the project a few weeks ago'

Fairchild Club Forum