Re: ADC OIL FILTER SYSTEM STC "UPDATE" F-24

An archive of all the messages posted in the old Fairchild Club Yahoo Group. It is not possible to start a new topic in this forum (please use one of the other forums for new threads), but you can continue to post on existing topics.
Post Reply
Jp Lorie
Posts: 62
Joined: Wed Dec 16, 2009 7:20 am

ADC OIL FILTER SYSTEM STC "UPDATE" F-24

Post by Jp Lorie »

'The FAA is now working on the proposed STC  to install an ADC screen oil filter on a Warner powered F-24 Type Certificate 707 based on my installation.
If it is successful, all you fellow owners of  F-24W will be able to install same according to STC.
( you may or may not like my installation, but I do)

Ranger powered F-24's;      According to Joe, owner of ADC, after we have obtained the STC for the Warner, the next step is for someone with an F-24R to contact Joe, Purchase and make a mock-up installation of the system and submit
1. Drawings.
2. Pictures
3. Instructions
to ADC.  ADC will then make an Alteration to the existing STC.

ADC 206-546-3011
aviationdevelopment.com

(The above info is as I understand it to be the actual outcome may vary.)





[Non-text portions of this message have been removed]'
Bob
Posts: 43
Joined: Fri Feb 13, 2009 7:23 pm

Re: ADC OIL FILTER SYSTEM STC "UPDATE" F-24

Post by Bob »

'JP Lorie,

I will try to call Joe at ADC tomorrow. I purchased one of his filters a few years ago and installed it with a 337. I am very pleased with the filter and the installation.

Bob Waldron
1939 Fairchild 24 K
Webster, MN


--- In fairchildclub@yahoogroups.com, Jp Lorie wrote:
>
> The FAA is now working on the proposed STC  to install an ADC screen oil filter on a Warner powered F-24 Type Certificate 707 based on my installation.
> If it is successful, all you fellow owners of  F-24W will be able to install same according to STC.
> ( you may or may not like my installation, but I do)
>
> Ranger powered F-24's;      According to Joe, owner of ADC, after we have obtained the STC for the Warner, the next step is for someone with an F-24R to contact Joe, Purchase and make a mock-up installation of the system and submit
> 1. Drawings.
> 2. Pictures
> 3. Instructions
> to ADC.  ADC will then make an Alteration to the existing STC.
>
> ADC 206-546-3011
> aviationdevelopment.com
>
> (The above info is as I understand it to be the actual outcome may vary.)
>
>
>
>
>
> [Non-text portions of this message have been removed]
>
'
Post Reply