Re: Champion C26 plugs needed

[Michael Danielle]

'About once a year I have to remove my E-80 and send it off to have it
de-oiled and the clutch adjusted. It just starts slipping badly.

Anyone here familiar enuf with the starter to point me to a guide for
performing the work myself? My aircraft is experimental so yellow tags
are optional.

Thanks

Ranger Mike
Experimental Great Lakes 2t-1a'

[Cy Galley]

'Is there a seal that needs replacing?

----- Original Message -----
From: Michael Danielle
To: fairchildclub@yahoogroups.com
Sent: Thursday, August 28, 2008 3:53 PM
Subject: [fairchildclub] E-80 Starter


About once a year I have to remove my E-80 and send it off to have it
de-oiled and the clutch adjusted. It just starts slipping badly.

Anyone here familiar enuf with the starter to point me to a guide for
performing the work myself? My aircraft is experimental so yellow tags
are optional.

Thanks

Ranger Mike
Experimental Great Lakes 2t-1a





[Non-text portions of this message have been removed]

'

[Mike Danielle]

'The seal was replace last o'haul, 8 mo ago.

MD

----- Original Message -----
From: "Cy Galley"
To:
Sent: Friday, August 29, 2008 6:27 AM
Subject: Re: [fairchildclub] E-80 Starter


> Is there a seal that needs replacing?
>
>
> ----- Original Message -----
> From: Michael Danielle
> To: fairchildclub@yahoogroups.com
> Sent: Thursday, August 28, 2008 3:53 PM
> Subject: [fairchildclub] E-80 Starter
>
>
> About once a year I have to remove my E-80 and send it off to have it
> de-oiled and the clutch adjusted. It just starts slipping badly.
>
> Anyone here familiar enuf with the starter to point me to a guide for
> performing the work myself? My aircraft is experimental so yellow tags
> are optional.
>
> Thanks
>
> Ranger Mike
> Experimental Great Lakes 2t-1a
>
>
>
>
>
> [Non-text portions of this message have been removed]
>
>
> ------------------------------------
>
> Yahoo! Groups Links
>
>
>

'

[David Stroud]

'Does anyone on the list have a source for Champion C26 plugs ? They may have been
specified for a Warner engine with unshielded plug wires. Thanks.

David Stroud Ottawa, Canada
Christavia C-FDWS
Fairchild 51 replica
under construction C-FYXV


[Non-text portions of this message have been removed]'

[Bob Haas]

'Dave, I have 8 C26 Champion plugs. The electrodes are sharp but
not clean. The nut portions have some rust

The porcelain are clean and the brass knobs fine. Unfortunately the boxes
are not pristine either. I think they will clean up

And would serviceable. If you like I'll send you some pictures. Bob Haas



_____

From: fairchildclub@yahoogroups.com [mailto:fairchildclub@yahoogroups.com]
On Behalf Of DAVID STROUD
Sent: Sunday, August 31, 2008 10:20 AM
To: fairchildclub@yahoogroups.com
Subject: [fairchildclub] Champion C26 plugs needed



Does anyone on the list have a source for Champion C26 plugs ? They may have
been
specified for a Warner engine with unshielded plug wires. Thanks.

David Stroud Ottawa, Canada
Christavia C-FDWS
Fairchild 51 replica
under construction C-FYXV

[Non-text portions of this message have been removed]





[Non-text portions of this message have been removed]'

[n244ms@aol.com]

'Dave, I have several new C-26 plugs in boxes. How many do you need? I
will check to see how many total I have that I can let go of.

Mike Still
Chandler, AZ



**************It's only a deal if it's where you want to go. Find your travel
deal here.
(http://information.travel.aol.com/deals?ncid=aoltrv00050000000047)


[Non-text portions of this message have been removed]'

[David Stroud]

'Got an offer from another for a set of four used, but I'd prefer a
set of four new plugs if you can spare them. Pls. say price if they are
available including cost to mail them to zip K0A2T0 in Ontario, canada.
Thanks Mike.

David Stroud Ottawa, Canada
Christavia C-FDWS
Fairchild 51 replica
under construction C-FYXV

----- Original Message -----
From: n244ms@aol.com
To: fairchildclub@yahoogroups.com
Sent: Sunday, August 31, 2008 3:34 PM
Subject: Re: [fairchildclub] Champion C26 plugs needed


Dave, I have several new C-26 plugs in boxes. How many do you need? I
will check to see how many total I have that I can let go of.

Mike Still
Chandler, AZ

**************It's only a deal if it's where you want to go. Find your travel
deal here.
(http://information.travel.aol.com/deals?ncid=aoltrv00050000000047)

[Non-text portions of this message have been removed]






------------------------------------------------------------------------------



No virus found in this incoming message.
Checked by AVG - http://www.avg.com
Version: 8.0.169 / Virus Database: 270.6.14/1643 - Release Date: 30/08/2008 5:18 PM


[Non-text portions of this message have been removed]

'

[David Stroud]

'Good morning, Mike. Any chance you found four good plugs ? Thanks.

David Stroud Ottawa, Canada
Christavia C-FDWS
Fairchild 51 replica
under construction C-FYXV

----- Original Message -----
From: n244ms@aol.com
To: fairchildclub@yahoogroups.com
Sent: Sunday, August 31, 2008 3:34 PM
Subject: Re: [fairchildclub] Champion C26 plugs needed


Dave, I have several new C-26 plugs in boxes. How many do you need? I
will check to see how many total I have that I can let go of.

Mike Still
Chandler, AZ

**************It's only a deal if it's where you want to go. Find your travel
deal here.
(http://information.travel.aol.com/deals?ncid=aoltrv00050000000047)

[Non-text portions of this message have been removed]






------------------------------------------------------------------------------



No virus found in this incoming message.
Checked by AVG - http://www.avg.com
Version: 8.0.169 / Virus Database: 270.6.14/1643 - Release Date: 30/08/2008 5:18 PM


[Non-text portions of this message have been removed]

'