Re: Tailwheel grease seals

[rangerrobertmn]

'Hey folks,

I need a pair of grease seals for the SC-10 tailwheel on my 24K. I
think that they are 1 11/16 O.D and 7/8 I.D. I was at my bearing store
today, and mistakenly was looking for 5/8 inch I.D. seals. They
couldn't find any of those. I will go back on Monday and look for 7/8
I.D. seals. Does anyone know the correct size and number and have a
source?

Thanks in advance.

Bob Waldron
1939 Fairchild 24 K
Stillwater, MN
eMail NC18681 at HOTMAIL dot COM'

[Bob Haas]

'The number of the seal is C/R 9910 That number should cross in a paper
Bearing and seal Catalog

Bob Haas NC 81236



_____

From: fairchildclub@yahoogroups.com [mailto:fairchildclub@yahoogroups.com]
On Behalf Of rangerrobertmn
Sent: Friday, June 01, 2007 7:00 PM
To: fairchildclub@yahoogroups.com
Subject: [fairchildclub] Tailwheel grease seals



Hey folks,

I need a pair of grease seals for the SC-10 tailwheel on my 24K. I
think that they are 1 11/16 O.D and 7/8 I.D. I was at my bearing store
today, and mistakenly was looking for 5/8 inch I.D. seals. They
couldn't find any of those. I will go back on Monday and look for 7/8
I.D. seals. Does anyone know the correct size and number and have a
source?

Thanks in advance.

Bob Waldron
1939 Fairchild 24 K
Stillwater, MN
eMail NC18681 at HOTMAIL dot COM





[Non-text portions of this message have been removed]'

[rangerrobertmn]

'Bob Haas,

Thanks for the info. I will call my bearing store on MOnday morning.

Bob Waldron.



--- In fairchildclub@yahoogroups.com, "Bob Haas"
wrote:

>
> The number of the seal is C/R 9910 That number should cross in a

paper

> Bearing and seal Catalog
>
> Bob Haas NC 81236
>
>
>
> _____
>
> From: fairchildclub@yahoogroups.com

[mailto:fairchildclub@yahoogroups.com]

> On Behalf Of rangerrobertmn
> Sent: Friday, June 01, 2007 7:00 PM
> To: fairchildclub@yahoogroups.com
> Subject: [fairchildclub] Tailwheel grease seals
>
>
>
> Hey folks,
>
> I need a pair of grease seals for the SC-10 tailwheel on my 24K. I
> think that they are 1 11/16 O.D and 7/8 I.D. I was at my bearing

store

> today, and mistakenly was looking for 5/8 inch I.D. seals. They
> couldn't find any of those. I will go back on Monday and look for

7/8

> I.D. seals. Does anyone know the correct size and number and have

a

> source?
>
> Thanks in advance.
>
> Bob Waldron
> 1939 Fairchild 24 K
> Stillwater, MN
> eMail NC18681 at HOTMAIL dot COM
>
>
>
>
>
> [Non-text portions of this message have been removed]
>

'

[rangerrobertmn]

'Bob,

My bearing store could not find that number. I expect that the C/R
stands for Chicago Rawhide. We were unable to find that part
number. Store thought that there might be a missing digit.

Bob W.



--- In fairchildclub@yahoogroups.com, "Bob Haas"
wrote:

>
> The number of the seal is C/R 9910 That number should cross in a

paper

> Bearing and seal Catalog
>
> Bob Haas NC 81236
>
>
>
> _____
>
> From: fairchildclub@yahoogroups.com

[mailto:fairchildclub@yahoogroups.com]

> On Behalf Of rangerrobertmn
> Sent: Friday, June 01, 2007 7:00 PM
> To: fairchildclub@yahoogroups.com
> Subject: [fairchildclub] Tailwheel grease seals
>
>
>
> Hey folks,
>
> I need a pair of grease seals for the SC-10 tailwheel on my 24K. I
> think that they are 1 11/16 O.D and 7/8 I.D. I was at my bearing

store

> today, and mistakenly was looking for 5/8 inch I.D. seals. They
> couldn't find any of those. I will go back on Monday and look for

7/8

> I.D. seals. Does anyone know the correct size and number and have

a

> source?
>
> Thanks in advance.
>
> Bob Waldron
> 1939 Fairchild 24 K
> Stillwater, MN
> eMail NC18681 at HOTMAIL dot COM
>
>
>
>
>
> [Non-text portions of this message have been removed]
>

'

[Bob Haas]

'OK, try 1099 or 18964 or 1956. You could see if he has a seal listed for
Timken 03062 030162 bearings. I did this

Two years ago but the receipts went with the airplane. BH



_____

From: fairchildclub@yahoogroups.com [mailto:fairchildclub@yahoogroups.com]
On Behalf Of rangerrobertmn
Sent: Monday, June 04, 2007 9:15 AM
To: fairchildclub@yahoogroups.com
Subject: [fairchildclub] Re: Tailwheel grease seals



Bob,

My bearing store could not find that number. I expect that the C/R
stands for Chicago Rawhide. We were unable to find that part
number. Store thought that there might be a missing digit.

Bob W.

--- In fairchildclub@
yahoogroups.com, "Bob Haas"
wrote:

>
> The number of the seal is C/R 9910 That number should cross in a

paper

> Bearing and seal Catalog
>
> Bob Haas NC 81236
>
>
>
> _____
>
> From: fairchildclub@

yahoogroups.com
[mailto:fairchildclub@
yahoogroups.com]

> On Behalf Of rangerrobertmn
> Sent: Friday, June 01, 2007 7:00 PM
> To: fairchildclub@

yahoogroups.com

> Subject: [fairchildclub] Tailwheel grease seals
>
>
>
> Hey folks,
>
> I need a pair of grease seals for the SC-10 tailwheel on my 24K. I
> think that they are 1 11/16 O.D and 7/8 I.D. I was at my bearing

store

> today, and mistakenly was looking for 5/8 inch I.D. seals. They
> couldn't find any of those. I will go back on Monday and look for

7/8

> I.D. seals. Does anyone know the correct size and number and have

a

> source?
>
> Thanks in advance.
>
> Bob Waldron
> 1939 Fairchild 24 K
> Stillwater, MN
> eMail NC18681 at HOTMAIL dot COM
>
>
>
>
>
> [Non-text portions of this message have been removed]
>

[Non-text portions of this message have been removed]'

[rangerrobertmn]

'Bob Haas,

Thanks for the leads. I will keep looking.

Bob Waldron
1939 Fairchild 24K


--- In fairchildclub@yahoogroups.com, "Bob Haas"
wrote:

>
> OK, try 1099 or 18964 or 1956. You could see if he has a seal

listed for

> Timken 03062 030162 bearings. I did this
>
> Two years ago but the receipts went with the airplane. BH
>
>
>
> _____
>
> From: fairchildclub@yahoogroups.com

[mailto:fairchildclub@yahoogroups.com]

> On Behalf Of rangerrobertmn
> Sent: Monday, June 04, 2007 9:15 AM
> To: fairchildclub@yahoogroups.com
> Subject: [fairchildclub] Re: Tailwheel grease seals
>
>
>
> Bob,
>
> My bearing store could not find that number. I expect that the C/R
> stands for Chicago Rawhide. We were unable to find that part
> number. Store thought that there might be a missing digit.
>
> Bob W.
>
> --- In fairchildclub@
> yahoogroups.com, "Bob Haas"
> wrote:
> >
> > The number of the seal is C/R 9910 That number should cross in a
> paper
> > Bearing and seal Catalog
> >
> > Bob Haas NC 81236
> >
> >
> >
> > _____
> >
> > From: fairchildclub@
> yahoogroups.com
> [mailto:fairchildclub@
> yahoogroups.com]
> > On Behalf Of rangerrobertmn
> > Sent: Friday, June 01, 2007 7:00 PM
> > To: fairchildclub@
> yahoogroups.com
> > Subject: [fairchildclub] Tailwheel grease seals
> >
> >
> >
> > Hey folks,
> >
> > I need a pair of grease seals for the SC-10 tailwheel on my 24K.

I

> > think that they are 1 11/16 O.D and 7/8 I.D. I was at my bearing
> store
> > today, and mistakenly was looking for 5/8 inch I.D. seals. They
> > couldn't find any of those. I will go back on Monday and look

for

> 7/8
> > I.D. seals. Does anyone know the correct size and number and

have

> a
> > source?
> >
> > Thanks in advance.
> >
> > Bob Waldron
> > 1939 Fairchild 24 K
> > Stillwater, MN
> > eMail NC18681 at HOTMAIL dot COM
> >
> >
> >
> >
> >
> > [Non-text portions of this message have been removed]
> >
>
>
>
>
>
> [Non-text portions of this message have been removed]
>

'