Re: Template for rebuild wooden structure F24W41

An archive of all the messages posted in the old Fairchild Club Yahoo Group. It is not possible to start a new topic in this forum (please use one of the other forums for new threads), but you can continue to post on existing topics.
Post Reply
swedish_argus
Posts: 10
Joined: Fri Dec 30, 2005 4:53 pm

Template for rebuild wooden structure F24W41

Post by swedish_argus »

'Fairchild Friend

I wounder if any of you out there have templates for rebuilding the
wooden structure on a F24.
Both upper and under structure.

Or if you knows any one who has

Best regards

Göran Hansson'
james chybicki
Posts: 213
Joined: Fri Aug 16, 2002 11:37 am

Re: Template for rebuild wooden structure F24W41

Post by james chybicki »

'Hi Goran-
We rebuilt all fusleage structures on our plane, we
used old items as pattern,or we used the C.D. we
bought from the club. since all the planes were hand
built, each wood piece is just a little different on
each plane.
I will see what we have i nthe hangar and see if there
is a way we can get teh info to you
Jim

--- swedish_argus wrote:
> Fairchild Friend
>
> I wounder if any of you out there have templates for
> rebuilding the
> wooden structure on a F24.
> Both upper and under structure.
>
> Or if you knows any one who has
>
> Best regards
>
> Göran Hansson
>
>
>
>
>
>
>

__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com'
windshieldguy2000
Posts: 59
Joined: Sat Jan 24, 2004 9:03 pm

Re: Template for rebuild wooden structure F24W41

Post by windshieldguy2000 »

'Goran: Are you referring to the fuselage stringers and formers or some
other wood structure? I have patterns for a lot of the wood structure
in and around the cabin (door frames, etc.) but don't have any usable
patterns for the stringers and formers. However, the guy who built my
stringers and formers did a very good job and could probably make you a
set. Let me know if I can help.

Best Wishes,
Brad Donner
NC77605'
Post Reply