Re: F24 CD

[Jamie S. Treat]

'Heads up Ranger users,


The two New/Old stock Ranger engine bushing that I picked up from
Fresno Airparts a few hours ago are failing. This is due to age of
the rubber and bonding agent (60 year old parts). I would not
recommend you spend your hard earned money on these. Unless,
however, if you need the mount and the center ground bushing, they
are perfect.

My recommendation is send your failed units to Southland Manuf for
rework. Cost is a little higher, but you will end up with new rubber
and bonding that will last a long time. Nothing like new parts.

Here is the contact info: (Also in the Parts & Services list)
Southland Manufacturing Corp. Owner: Larry Trumpore P.O. Box 350
Hope, NJ. 07844 Phone 908-459-5858

Southland also can make the Warner 165/185 bushings. I have also
sent them an old set of Warner 145 bushing for a master. I don't
believe they have tooled for manuf on the 145 units, not much
demand. But the capability is there.

Jamie S. Treat A&P/IA
Aircraft Restoration & Repair
24201 David C. Johnson Loop
Kelly Airpark
http://www.kellyairpark.com
Elbert, CO 80106
HM/Shop 303-648-0130
JamieTreat@direcway.com'

[John Berendt]

'Jamie,
cost is a little higher! trumpmore quoted me a price at Oshkosh of $120.00
per mount.

John Berendt

----- Original Message -----
From: "Jamie S. Treat"
To:
Sent: Sunday, February 05, 2006 10:36 AM
Subject: [fairchildclub] Ranger Engine Bushings


> Heads up Ranger users,
>
>
> The two New/Old stock Ranger engine bushing that I picked up from
> Fresno Airparts a few hours ago are failing. This is due to age of
> the rubber and bonding agent (60 year old parts). I would not
> recommend you spend your hard earned money on these. Unless,
> however, if you need the mount and the center ground bushing, they
> are perfect.
>
> My recommendation is send your failed units to Southland Manuf for
> rework. Cost is a little higher, but you will end up with new rubber
> and bonding that will last a long time. Nothing like new parts.
>
> Here is the contact info: (Also in the Parts & Services list)
> Southland Manufacturing Corp. Owner: Larry Trumpore P.O. Box 350
> Hope, NJ. 07844 Phone 908-459-5858
>
> Southland also can make the Warner 165/185 bushings. I have also
> sent them an old set of Warner 145 bushing for a master. I don't
> believe they have tooled for manuf on the 145 units, not much
> demand. But the capability is there.
>
> Jamie S. Treat A&P/IA
> Aircraft Restoration & Repair
> 24201 David C. Johnson Loop
> Kelly Airpark
> http://www.kellyairpark.com
> Elbert, CO 80106
> HM/Shop 303-648-0130
> JamieTreat@direcway.com
>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>

'

[Jamie S. Treat]

'John,

I just paid $180.00 (2 Units) for old junk ones from Fresno. I would rather
spend $120.00 per unit that will last at least 10 years, rather then
spending $90.00 per unit and replace them every 20 hours. Need to do the
math.

Jamie

----- Original Message -----
From: "John Berendt"
To:
Sent: Monday, February 06, 2006 7:12 AM
Subject: Re: [fairchildclub] Ranger Engine Bushings


> Jamie,
> cost is a little higher! trumpmore quoted me a price at Oshkosh of
> $120.00
> per mount.
>
> John Berendt
> ----- Original Message -----
> From: "Jamie S. Treat"
> To:
> Sent: Sunday, February 05, 2006 10:36 AM
> Subject: [fairchildclub] Ranger Engine Bushings
>
>
>> Heads up Ranger users,
>>
>>
>> The two New/Old stock Ranger engine bushing that I picked up from
>> Fresno Airparts a few hours ago are failing. This is due to age of
>> the rubber and bonding agent (60 year old parts). I would not
>> recommend you spend your hard earned money on these. Unless,
>> however, if you need the mount and the center ground bushing, they
>> are perfect.
>>
>> My recommendation is send your failed units to Southland Manuf for
>> rework. Cost is a little higher, but you will end up with new rubber
>> and bonding that will last a long time. Nothing like new parts.
>>
>> Here is the contact info: (Also in the Parts & Services list)
>> Southland Manufacturing Corp. Owner: Larry Trumpore P.O. Box 350
>> Hope, NJ. 07844 Phone 908-459-5858
>>
>> Southland also can make the Warner 165/185 bushings. I have also
>> sent them an old set of Warner 145 bushing for a master. I don't
>> believe they have tooled for manuf on the 145 units, not much
>> demand. But the capability is there.
>>
>> Jamie S. Treat A&P/IA
>> Aircraft Restoration & Repair
>> 24201 David C. Johnson Loop
>> Kelly Airpark
>> http://www.kellyairpark.com
>> Elbert, CO 80106
>> HM/Shop 303-648-0130
>> JamieTreat@direcway.com
>>
>>
>>
>>
>>
>>
>> Yahoo! Groups Links
>>
>>
>>
>>
>>
>>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>

'

[Chief Russell]

'Dick Russell, Wichita, KS
-----Original Message-----
From: fairchildclub@yahoogroups.com
[mailto:fairchildclub@yahoogroups.com]On Behalf Of Jamie S. Treat
Sent: Monday, February 06, 2006 10:27 PM
To: fairchildclub@yahoogroups.com
Subject: Re: [fairchildclub] Ranger Engine Bushings


John,

I just paid $180.00 (2 Units) for old junk ones from Fresno. I would
rather
spend $120.00 per unit that will last at least 10 years, rather then
spending $90.00 per unit and replace them every 20 hours. Need to do the
math.

Jamie

----- Original Message -----
From: "John Berendt"
To:
Sent: Monday, February 06, 2006 7:12 AM
Subject: Re: [fairchildclub] Ranger Engine Bushings


> Jamie,
> cost is a little higher! trumpmore quoted me a price at Oshkosh of
> $120.00
> per mount.
>
> John Berendt
> ----- Original Message -----
> From: "Jamie S. Treat"
> To:
> Sent: Sunday, February 05, 2006 10:36 AM
> Subject: [fairchildclub] Ranger Engine Bushings
>
>
>> Heads up Ranger users,
>>
>>
>> The two New/Old stock Ranger engine bushing that I picked up from
>> Fresno Airparts a few hours ago are failing. This is due to age of
>> the rubber and bonding agent (60 year old parts). I would not
>> recommend you spend your hard earned money on these. Unless,
>> however, if you need the mount and the center ground bushing, they
>> are perfect.
>>
>> My recommendation is send your failed units to Southland Manuf for
>> rework. Cost is a little higher, but you will end up with new rubber
>> and bonding that will last a long time. Nothing like new parts.
>>
>> Here is the contact info: (Also in the Parts & Services list)
>> Southland Manufacturing Corp. Owner: Larry Trumpore P.O. Box 350
>> Hope, NJ. 07844 Phone 908-459-5858
>>
>> Southland also can make the Warner 165/185 bushings. I have also
>> sent them an old set of Warner 145 bushing for a master. I don't
>> believe they have tooled for manuf on the 145 units, not much
>> demand. But the capability is there.
>>
>> Jamie S. Treat A&P/IA
>> Aircraft Restoration & Repair
>> 24201 David C. Johnson Loop
>> Kelly Airpark
>> http://www.kellyairpark.com
>> Elbert, CO 80106
>> HM/Shop 303-648-0130
>> JamieTreat@direcway.com
>>
>>
>>
>>
>>
>>
>> Yahoo! Groups Links
>>
>>
>>
>>
>>
>>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>




SPONSORED LINKS Private plane Fairchild semiconductor Plane reservation
Fairchild Jet plane Pedal plane


----------------------------------------------------------------------------
--
YAHOO! GROUPS LINKS

a.. Visit your group "fairchildclub" on the web.

b.. To unsubscribe from this group, send an email to:
fairchildclub-unsubscribe@yahoogroups.com

c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service.


----------------------------------------------------------------------------
--



[Non-text portions of this message have been removed]

'

[Chief Russell]

'How does one procure the CD in question-?

Dick Russell, Wichita
81229
-----Original Message-----
From: fairchildclub@yahoogroups.com
[mailto:fairchildclub@yahoogroups.com]On Behalf Of Jamie S. Treat
Sent: Monday, February 06, 2006 10:27 PM
To: fairchildclub@yahoogroups.com
Subject: Re: [fairchildclub] Ranger Engine Bushings


John,

I just paid $180.00 (2 Units) for old junk ones from Fresno. I would
rather
spend $120.00 per unit that will last at least 10 years, rather then
spending $90.00 per unit and replace them every 20 hours. Need to do the
math.

Jamie

----- Original Message -----
From: "John Berendt"
To:
Sent: Monday, February 06, 2006 7:12 AM
Subject: Re: [fairchildclub] Ranger Engine Bushings


> Jamie,
> cost is a little higher! trumpmore quoted me a price at Oshkosh of
> $120.00
> per mount.
>
> John Berendt
> ----- Original Message -----
> From: "Jamie S. Treat"
> To:
> Sent: Sunday, February 05, 2006 10:36 AM
> Subject: [fairchildclub] Ranger Engine Bushings
>
>
>> Heads up Ranger users,
>>
>>
>> The two New/Old stock Ranger engine bushing that I picked up from
>> Fresno Airparts a few hours ago are failing. This is due to age of
>> the rubber and bonding agent (60 year old parts). I would not
>> recommend you spend your hard earned money on these. Unless,
>> however, if you need the mount and the center ground bushing, they
>> are perfect.
>>
>> My recommendation is send your failed units to Southland Manuf for
>> rework. Cost is a little higher, but you will end up with new rubber
>> and bonding that will last a long time. Nothing like new parts.
>>
>> Here is the contact info: (Also in the Parts & Services list)
>> Southland Manufacturing Corp. Owner: Larry Trumpore P.O. Box 350
>> Hope, NJ. 07844 Phone 908-459-5858
>>
>> Southland also can make the Warner 165/185 bushings. I have also
>> sent them an old set of Warner 145 bushing for a master. I don't
>> believe they have tooled for manuf on the 145 units, not much
>> demand. But the capability is there.
>>
>> Jamie S. Treat A&P/IA
>> Aircraft Restoration & Repair
>> 24201 David C. Johnson Loop
>> Kelly Airpark
>> http://www.kellyairpark.com
>> Elbert, CO 80106
>> HM/Shop 303-648-0130
>> JamieTreat@direcway.com
>>
>>
>>
>>
>>
>>
>> Yahoo! Groups Links
>>
>>
>>
>>
>>
>>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>




SPONSORED LINKS Private plane Fairchild semiconductor Plane reservation
Fairchild Jet plane Pedal plane


----------------------------------------------------------------------------
--
YAHOO! GROUPS LINKS

a.. Visit your group "fairchildclub" on the web.

b.. To unsubscribe from this group, send an email to:
fairchildclub-unsubscribe@yahoogroups.com

c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service.


----------------------------------------------------------------------------
--



[Non-text portions of this message have been removed]

'

[Jamie S. Treat]

'Dick,

I provide them to John (Club Pres). He will provide for $45.00.

Jamie

----- Original Message -----
From: "Chief Russell"
To:
Sent: Tuesday, February 07, 2006 7:55 AM
Subject: [fairchildclub] F24 CD


> How does one procure the CD in question-?
>
> Dick Russell, Wichita
> 81229
> -----Original Message-----
> From: fairchildclub@yahoogroups.com
> [mailto:fairchildclub@yahoogroups.com]On Behalf Of Jamie S. Treat
> Sent: Monday, February 06, 2006 10:27 PM
> To: fairchildclub@yahoogroups.com
> Subject: Re: [fairchildclub] Ranger Engine Bushings
>
>
> John,
>
> I just paid $180.00 (2 Units) for old junk ones from Fresno. I would
> rather
> spend $120.00 per unit that will last at least 10 years, rather then
> spending $90.00 per unit and replace them every 20 hours. Need to do the
> math.
>
> Jamie
>
>
>
> ----- Original Message -----
> From: "John Berendt"
> To:
> Sent: Monday, February 06, 2006 7:12 AM
> Subject: Re: [fairchildclub] Ranger Engine Bushings
>
>
> > Jamie,
> > cost is a little higher! trumpmore quoted me a price at Oshkosh of
> > $120.00
> > per mount.
> >
> > John Berendt
> > ----- Original Message -----
> > From: "Jamie S. Treat"
> > To:
> > Sent: Sunday, February 05, 2006 10:36 AM
> > Subject: [fairchildclub] Ranger Engine Bushings
> >
> >
> >> Heads up Ranger users,
> >>
> >>
> >> The two New/Old stock Ranger engine bushing that I picked up from
> >> Fresno Airparts a few hours ago are failing. This is due to age of
> >> the rubber and bonding agent (60 year old parts). I would not
> >> recommend you spend your hard earned money on these. Unless,
> >> however, if you need the mount and the center ground bushing, they
> >> are perfect.
> >>
> >> My recommendation is send your failed units to Southland Manuf for
> >> rework. Cost is a little higher, but you will end up with new rubber
> >> and bonding that will last a long time. Nothing like new parts.
> >>
> >> Here is the contact info: (Also in the Parts & Services list)
> >> Southland Manufacturing Corp. Owner: Larry Trumpore P.O. Box 350
> >> Hope, NJ. 07844 Phone 908-459-5858
> >>
> >> Southland also can make the Warner 165/185 bushings. I have also
> >> sent them an old set of Warner 145 bushing for a master. I don't
> >> believe they have tooled for manuf on the 145 units, not much
> >> demand. But the capability is there.
> >>
> >> Jamie S. Treat A&P/IA
> >> Aircraft Restoration & Repair
> >> 24201 David C. Johnson Loop
> >> Kelly Airpark
> >> http://www.kellyairpark.com
> >> Elbert, CO 80106
> >> HM/Shop 303-648-0130
> >> JamieTreat@direcway.com
> >>
> >>
> >>
> >>
> >>
> >>
> >> Yahoo! Groups Links
> >>
> >>
> >>
> >>
> >>
> >>
> >
> >
> >
> >
> > Yahoo! Groups Links
> >
> >
> >
> >
> >
> >
> >
>
>
>
>
> SPONSORED LINKS Private plane Fairchild semiconductor Plane reservation
> Fairchild Jet plane Pedal plane
>
>
> ----------------------------------------------------------------------------
> --
> YAHOO! GROUPS LINKS
>
> a.. Visit your group "fairchildclub" on the web.
>
> b.. To unsubscribe from this group, send an email to:
> fairchildclub-unsubscribe@yahoogroups.com
>
> c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of
> Service.
>
>
> ----------------------------------------------------------------------------
> --
>
>
>
> [Non-text portions of this message have been removed]
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>

'

[John Berendt]

'Send $40.00 to the Fairchild Club and we will send you a CD,

John berendt

----- Original Message -----
From: "Chief Russell"
To:
Sent: Tuesday, February 07, 2006 8:55 AM
Subject: [fairchildclub] F24 CD


> How does one procure the CD in question-?
>
> Dick Russell, Wichita
> 81229
> -----Original Message-----
> From: fairchildclub@yahoogroups.com
> [mailto:fairchildclub@yahoogroups.com]On Behalf Of Jamie S. Treat
> Sent: Monday, February 06, 2006 10:27 PM
> To: fairchildclub@yahoogroups.com
> Subject: Re: [fairchildclub] Ranger Engine Bushings
>
>
> John,
>
> I just paid $180.00 (2 Units) for old junk ones from Fresno. I would
> rather
> spend $120.00 per unit that will last at least 10 years, rather then
> spending $90.00 per unit and replace them every 20 hours. Need to do the
> math.
>
> Jamie
>
>
>
> ----- Original Message -----
> From: "John Berendt"
> To:
> Sent: Monday, February 06, 2006 7:12 AM
> Subject: Re: [fairchildclub] Ranger Engine Bushings
>
>
> > Jamie,
> > cost is a little higher! trumpmore quoted me a price at Oshkosh of
> > $120.00
> > per mount.
> >
> > John Berendt
> > ----- Original Message -----
> > From: "Jamie S. Treat"
> > To:
> > Sent: Sunday, February 05, 2006 10:36 AM
> > Subject: [fairchildclub] Ranger Engine Bushings
> >
> >
> >> Heads up Ranger users,
> >>
> >>
> >> The two New/Old stock Ranger engine bushing that I picked up from
> >> Fresno Airparts a few hours ago are failing. This is due to age of
> >> the rubber and bonding agent (60 year old parts). I would not
> >> recommend you spend your hard earned money on these. Unless,
> >> however, if you need the mount and the center ground bushing, they
> >> are perfect.
> >>
> >> My recommendation is send your failed units to Southland Manuf for
> >> rework. Cost is a little higher, but you will end up with new rubber
> >> and bonding that will last a long time. Nothing like new parts.
> >>
> >> Here is the contact info: (Also in the Parts & Services list)
> >> Southland Manufacturing Corp. Owner: Larry Trumpore P.O. Box 350
> >> Hope, NJ. 07844 Phone 908-459-5858
> >>
> >> Southland also can make the Warner 165/185 bushings. I have also
> >> sent them an old set of Warner 145 bushing for a master. I don't
> >> believe they have tooled for manuf on the 145 units, not much
> >> demand. But the capability is there.
> >>
> >> Jamie S. Treat A&P/IA
> >> Aircraft Restoration & Repair
> >> 24201 David C. Johnson Loop
> >> Kelly Airpark
> >> http://www.kellyairpark.com
> >> Elbert, CO 80106
> >> HM/Shop 303-648-0130
> >> JamieTreat@direcway.com
> >>
> >>
> >>
> >>
> >>
> >>
> >> Yahoo! Groups Links
> >>
> >>
> >>
> >>
> >>
> >>
> >
> >
> >
> >
> > Yahoo! Groups Links
> >
> >
> >
> >
> >
> >
> >
>
>
>
>
> SPONSORED LINKS Private plane Fairchild semiconductor Plane
reservation
> Fairchild Jet plane Pedal plane
>
>
> --------------------------------------------------------------------------
--
> --
> YAHOO! GROUPS LINKS
>
> a.. Visit your group "fairchildclub" on the web.
>
> b.. To unsubscribe from this group, send an email to:
> fairchildclub-unsubscribe@yahoogroups.com
>
> c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of
> Service.
>
>
> --------------------------------------------------------------------------
--
> --
>
>
>
> [Non-text portions of this message have been removed]
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>

'