Re: Brake pads...

Tom Mueller · Post by **Tom Mueller** » Sun Sep 25, 2005 9:04 am

'Can anyone give me a lead on a one set of brake pads for just one
wheel on a F24? Just need one set, for one wheel. Sadly took off to
much lining to correct a dragging brake, and then realized I had a
malfunction master cylinder that was holding pressure. I understand
there might be two types of pads out there; I really need the type
that has slots for retraction springs. Anybody.......Pals
(Accepting collect calls) (559)584-6452
Tom
Hanford Ca.'

John Berendt · Post by **John Berendt** » Sun Sep 25, 2005 9:17 am

'Tom,
Call Fresno Airparts (559) 237-4863, The will sell you just the amount you
want. last price was $9.50 each, They have the slot for the springs and the
springs also.

John Berendt----- Original Message -----
From: "Tom Mueller"
To:
Sent: Sunday, September 25, 2005 10:04 AM
Subject: [fairchildclub] Brake pads...

> Can anyone give me a lead on a one set of brake pads for just one
> wheel on a F24? Just need one set, for one wheel. Sadly took off to
> much lining to correct a dragging brake, and then realized I had a
> malfunction master cylinder that was holding pressure. I understand
> there might be two types of pads out there; I really need the type
> that has slots for retraction springs. Anybody.......Pals
> (Accepting collect calls) (559)584-6452
> Tom
> Hanford Ca.
>
>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>

'

Tom Mueller · Post by **Tom Mueller** » Mon Sep 26, 2005 6:48 pm

'Thanks John,
I called Fresno Airparts and as luck would have it,
they recently found a crate of the Hayes brake lining pads stuck in
the back of their warehouse.
They now have 3,500 of the inch and a half type, a real good source
for future needs. Also tubes and
some back plates, fittings and such. Thanks again.
Tom
Hanford, Ca.'