Re: lift struts

rw_flyer · Post by **rw_flyer** » Sat Oct 12, 2002 1:36 pm

'John,

Fairchild 22 drawing #3469 on the Fairchild CD covers the front and rear
lift struts, and unlike most of the drawings this one is pretty readable.
For an F model front strut part #3467 the drawing calls for 1 3/4" x .058
1025 steel oval tubing, for the rear strut part #3441 it is 1.5" x .035 1025
oval tubing.

The set on my F-22 C7E/F project are: Front: 2.36" x 1.00" oval, Rear 2.0"
x 0.86" oval. I can't easily measure the wall thickness.

You should be able to substitute 4130 with no problems for the original
1025. Aircraft Spruce carries 4130 oval tubing in the right sizes but
apparently not with the right thicknesses.

-Russell

_________________________________________________________________
Send and receive Hotmail on your mobile device: http://mobile.msn.com'

Summers · Post by **Summers** » Sat Oct 12, 2002 4:21 pm

'Russel,
Please tell me more about the Fairchild CD. I'm new to the list.
Grover

----- Original Message -----
From: Russell Williams
To: fairchildclub@yahoogroups.com
Sent: Saturday, October 12, 2002 2:36 PM
Subject: Re: [fairchildclub] lift struts

John,

Fairchild 22 drawing #3469 on the Fairchild CD covers the front and rear
lift struts, and unlike most of the drawings this one is pretty readable.
For an F model front strut part #3467 the drawing calls for 1 3/4" x .058
1025 steel oval tubing, for the rear strut part #3441 it is 1.5" x .035 1025
oval tubing.

The set on my F-22 C7E/F project are: Front: 2.36" x 1.00" oval, Rear 2.0"
x 0.86" oval. I can't easily measure the wall thickness.

You should be able to substitute 4130 with no problems for the original
1025. Aircraft Spruce carries 4130 oval tubing in the right sizes but
apparently not with the right thicknesses.

-Russell

[Non-text portions of this message have been removed]

'

rw_flyer · Post by **rw_flyer** » Sat Oct 12, 2002 4:33 pm

'Jamie Treat put the CD together with F-24 and F-22 info plus Warner and
Ranger engine information. I think the Fairchild Club sells copies. Here's
a link to the info:
http://hometown.aol.com/jstreat360/ARRClassifedsindex.html

>From: "Summers"
>Reply-To: fairchildclub@yahoogroups.com
>To:
>Subject: Re: [fairchildclub] lift struts
>Date: Sat, 12 Oct 2002 17:20:37 -0500
>
>Russel,
>Please tell me more about the Fairchild CD. I'm new to the list.
>Grover

_________________________________________________________________
Chat with friends online, try MSN Messenger: http://messenger.msn.com'

Summers · Post by **Summers** » Sat Oct 12, 2002 6:17 pm

'Thanks Russel. Looks like there is a lot of good data there for an inexpensive price.

----- Original Message -----
From: Russell Williams
To: fairchildclub@yahoogroups.com
Sent: Saturday, October 12, 2002 5:33 PM
Subject: Re: [fairchildclub] lift struts

Jamie Treat put the CD together with F-24 and F-22 info plus Warner and
Ranger engine information. I think the Fairchild Club sells copies. Here's
a link to the info:
http://hometown.aol.com/jstreat360/ARRClassifedsindex.html

>From: "Summers"
>Reply-To: fairchildclub@yahoogroups.com
>To:
>Subject: Re: [fairchildclub] lift struts
>Date: Sat, 12 Oct 2002 17:20:37 -0500
>
>Russel,
>Please tell me more about the Fairchild CD. I'm new to the list.
>Grover

[Non-text portions of this message have been removed]

'

John Berendt · Post by **John Berendt** » Sun Oct 13, 2002 8:23 am

'Grover,

The CD is avalable form the Fairchild Club. Coxzt is $40.00 including
postage.Clubs address is 7645 Echo Point Road, Cannon Falls, MN 55009.

John Berendt
Fairchild Club

----- Original Message -----
From: "Summers"
To:
Sent: Saturday, October 12, 2002 5:20 PM
Subject: Re: [fairchildclub] lift struts

> Russel,
> Please tell me more about the Fairchild CD. I'm new to the list.
> Grover
> ----- Original Message -----
> From: Russell Williams
> To: fairchildclub@yahoogroups.com
> Sent: Saturday, October 12, 2002 2:36 PM
> Subject: Re: [fairchildclub] lift struts
>
>
> John,
>
> Fairchild 22 drawing #3469 on the Fairchild CD covers the front and rear
> lift struts, and unlike most of the drawings this one is pretty
readable.
> For an F model front strut part #3467 the drawing calls for 1 3/4" x
.058
> 1025 steel oval tubing, for the rear strut part #3441 it is 1.5" x .035
1025
> oval tubing.
>
> The set on my F-22 C7E/F project are: Front: 2.36" x 1.00" oval, Rear
2.0"
> x 0.86" oval. I can't easily measure the wall thickness.
>
> You should be able to substitute 4130 with no problems for the original
> 1025. Aircraft Spruce carries 4130 oval tubing in the right sizes but
> apparently not with the right thicknesses.
>
> -Russell
>
>
>
> [Non-text portions of this message have been removed]
>
>
>
> To unsubscribe from this group, send an email to:
> fairchildclub-unsubscribe@yahoogroups.com
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>

'

harry hayman · Post by **harry hayman** » Thu Feb 05, 2009 8:46 am

'I have a set (4)lift struts which I believe were on the eaalier model F24
they are steel versus aluminum on my F24R9 .Also the aft struts are appprox. 2" longer and the major axis is smaller than my F24R9.I would
appreciate any info on the struts and any idea on pricing.as would like to sell them.
Harry

Harry Hayman
Phone 904-284-4276
Fax 904-284-3869'

chris bk · Post by **chris bk** » Thu Feb 05, 2009 11:30 am

'We're looking for lift struts for our FA24R UC61K EC-GXP, but we don't know if yours are useful for our plane. We also need some advice!
Thanks
Chris

--- El jue, 5/2/09, harry hayman escribió:

De: harry hayman
Asunto: [fairchildclub] lift struts
Para: "Fairchild"
Fecha: jueves, 5 febrero, 2009 3:46

I have a set (4)lift struts which I believe were on the eaalier model F24
they are steel versus aluminum on my F24R9 .Also the aft struts are appprox. 2" longer and the major axis is smaller than my F24R9.I would
appreciate any info on the struts and any idea on pricing.as would like to sell them.
Harry

Harry Hayman
Phone 904-284-4276
Fax 904-284-3869

[Non-text portions of this message have been removed]'

chris bk · Post by **chris bk** » Thu Feb 05, 2009 11:31 am

'We're looking for lift struts for our FA24R UC61K EC-GXP, but we don't know if yours are useful for our plane. We also need some advice!
Thanks
Chris

--- El jue, 5/2/09, harry hayman escribió:

De: harry hayman
Asunto: [fairchildclub] lift struts
Para: "Fairchild"
Fecha: jueves, 5 febrero, 2009 3:46

I have a set (4)lift struts which I believe were on the eaalier model F24
they are steel versus aluminum on my F24R9 .Also the aft struts are appprox. 2" longer and the major axis is smaller than my F24R9.I would
appreciate any info on the struts and any idea on pricing.as would like to sell them.
Harry

Harry Hayman
Phone 904-284-4276
Fax 904-284-3869

[Non-text portions of this message have been removed]'

harry hayman · Post by **harry hayman** » Thu Feb 05, 2009 3:03 pm

'Hi Chris
Re the struts some one on this net will come up with info on them.
Email your questions to me and we will see what we can do.
Meanshile I will research them some more

Harry Hayman
Phone 904-284-4276
Fax 904-284-3869

--- On Thu, 2/5/09, chris bk wrote:

From: chris bk
Subject: Re: [fairchildclub] lift struts
To: fairchildclub@yahoogroups.com
Date: Thursday, February 5, 2009, 12:30 PM

We're looking for lift struts for our FA24R UC61K EC-GXP, but we don't know if yours are useful for our plane. We also need some advice!
Thanks
Chris

--- El jue, 5/2/09, harry hayman escribió:

De: harry hayman
Asunto: [fairchildclub] lift struts
Para: "Fairchild"
Fecha: jueves, 5 febrero, 2009 3:46

I have a set (4)lift struts which I believe were on the eaalier model F24
they are steel versus aluminum on my F24R9 .Also the aft struts are appprox. 2" longer and the major axis is smaller than my F24R9.I would
appreciate any info on the struts and any idea on pricing.as would like to sell them.
Harry

Harry Hayman
Phone 904-284-4276
Fax 904-284-3869

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]

'

chris bk · Post by **chris bk** » Fri Feb 06, 2009 1:22 am

'Hi Harry,
The question is if your wing strutts are the ones we need for our plane. The reference p/n is:wing lift strut --> Aluminium alloy tubing 535T o 61STFRON - STRUT - LIFT - 44169 REAR - STRUT - LIFT - 44170

The plane is a Fairchild R-24 or UC61K S/N: 946ThanksChris

--- El jue, 5/2/09, harry hayman escribió:

De: harry hayman
Asunto: Re: [fairchildclub] lift struts
Para: fairchildclub@yahoogroups.com
Fecha: jueves, 5 febrero, 2009 10:03

Hi Chris
Re the struts some one on this net will come up with info on them.
Email your questions to me and we will see what we can do.
Meanshile I will research them some more

Harry Hayman
Phone 904-284-4276
Fax 904-284-3869

--- On Thu, 2/5/09, chris bk wrote:

From: chris bk
Subject: Re: [fairchildclub] lift struts
To: fairchildclub@ yahoogroups. com
Date: Thursday, February 5, 2009, 12:30 PM

We're looking for lift struts for our FA24R UC61K EC-GXP, but we don't know if yours are useful for our plane. We also need some advice!
Thanks
Chris

--- El jue, 5/2/09, harry hayman escribió:

De: harry hayman
Asunto: [fairchildclub] lift struts
Para: "Fairchild"
Fecha: jueves, 5 febrero, 2009 3:46

I have a set (4)lift struts which I believe were on the eaalier model F24
they are steel versus aluminum on my F24R9 .Also the aft struts are appprox. 2" longer and the major axis is smaller than my F24R9.I would
appreciate any info on the struts and any idea on pricing.as would like to sell them.
Harry

Harry Hayman
Phone 904-284-4276
Fax 904-284-3869

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]

'