'If anyone needs Warner 165 I have one for sale. You can reach me at my privat email at faacert at att.biz
Steve Whelan
--- DAVID STROUD schrieb am Mo, 18.10.2010:
Von: DAVID STROUD
Betreff: [fairchildclub] Warner engine for sale
An: fairchildclub@yahoogroups.com
Datum: Montag, 18 ...
Search found 20 matches
- Mon Oct 18, 2010 4:13 pm
- Forum: Yahoo Group Archives
- Topic: AW: [fairchildclub] Warner engine for sale
- Replies: 2
- Views: 883
- Sun Jan 03, 2010 1:44 pm
- Forum: Yahoo Group Archives
- Topic: Re: Prop Hub Repair
- Replies: 2
- Views: 600
Re: Prop Hub Repair
'I'm an A&P, IA & DAR with a lot of experience with wooden prop hubs.
First thing you need to do, is hold the hub by a string, then give it a light tap with a small steel hammer. If it rings clear like a bell, you most probably have a good hub. If it has a dull ring or thud, it's most likely ...
First thing you need to do, is hold the hub by a string, then give it a light tap with a small steel hammer. If it rings clear like a bell, you most probably have a good hub. If it has a dull ring or thud, it's most likely ...
- Sat Dec 05, 2009 5:55 am
- Forum: Yahoo Group Archives
- Topic: Re: Need Opinions
- Replies: 8
- Views: 2757
Re: Need Opinions
'Try Radial Engines Ltd. in Guthrie OK, tel (405) 433 2263. They're an FAA approved repair station & very good with an excellent reputation. Prices are accordingly, but when completed, you can fly with piece of mind. Be advised, the 145 is not an easy engine for parts etc. I know several persons ...
- Tue Mar 31, 2009 12:31 am
- Forum: Yahoo Group Archives
- Topic: Re: Knob for control stick ?
- Replies: 9
- Views: 2388
AW: [fairchildclub] Knob for control stick ?
'Find a place that sells replacement parts for the WW 2 Jeep. The gear shift knob is the same & screws right on. Buy two, so they both match & use a lock nut under it.
Steve Whelan
--- Patricia Banks schrieb am Mo, 30.3.2009:
Von: Patricia Banks
Betreff: [fairchildclub] Knob for control ...
Steve Whelan
--- Patricia Banks schrieb am Mo, 30.3.2009:
Von: Patricia Banks
Betreff: [fairchildclub] Knob for control ...
- Mon Sep 08, 2008 10:37 pm
- Forum: Yahoo Group Archives
- Topic: Re: I flew the F-24 today
- Replies: 8
- Views: 2490
Re: I flew the F-24 today
'Did you do any wheel landings or all 3-point?
Steve Whelan
--- On Mon, 9/8/08, Tom Downey wrote:
From: Tom Downey
Subject: [fairchildclub] Re: I flew the F-24 today
To: fairchildclub@yahoogroups.com
Date: Monday, September 8, 2008, 4:28 PM
I might be there if Ya like ...
Steve Whelan
--- On Mon, 9/8/08, Tom Downey wrote:
From: Tom Downey
Subject: [fairchildclub] Re: I flew the F-24 today
To: fairchildclub@yahoogroups.com
Date: Monday, September 8, 2008, 4:28 PM
I might be there if Ya like ...
- Mon Jun 30, 2008 7:19 am
- Forum: Yahoo Group Archives
- Topic: Re: Ground Loop
- Replies: 4
- Views: 1339
Re: Ground Loop
'Guys,
Thanks for your input. For now, the jury is still out on whether or not the insurance will pay for the repair or write it off. I'm on a business trip in the US at the moment & when I return Wednesday I need to meet with the insurance adjuster & work this out. I did find an old undamaged ...
Thanks for your input. For now, the jury is still out on whether or not the insurance will pay for the repair or write it off. I'm on a business trip in the US at the moment & when I return Wednesday I need to meet with the insurance adjuster & work this out. I did find an old undamaged ...
- Tue May 27, 2008 10:16 am
- Forum: Yahoo Group Archives
- Topic: Re: mag wire clip
- Replies: 1
- Views: 817
Re: mag wire clip
'Google Radial Engines Ltd. & call Steve Curry. He's the guru on these engines.
Steve Whelan
Buhwana wrote:
Does anyone have one or two of the little clips that go over the end
of the ignition wire where it screws into the Magneto? The right mag
has been running a bit rough. I can usually ...
Steve Whelan
Buhwana wrote:
Does anyone have one or two of the little clips that go over the end
of the ignition wire where it screws into the Magneto? The right mag
has been running a bit rough. I can usually ...
- Thu Jan 31, 2008 4:47 pm
- Forum: Yahoo Group Archives
- Topic: Re: Fuel Valves
- Replies: 22
- Views: 6566
Re: Fuel Valves
'Do you have any original interior door handles & window cranks? I definately need those. Mine look too modern for the plane
Steve Whelan
james chybicki wrote:
Let me Check.
What year is your F24?
there apears to be a couple different versions used
between military and civilian models
Jim ...
Steve Whelan
james chybicki wrote:
Let me Check.
What year is your F24?
there apears to be a couple different versions used
between military and civilian models
Jim ...
- Thu Jan 31, 2008 4:46 pm
- Forum: Yahoo Group Archives
- Topic: Re: Fuel Valves
- Replies: 22
- Views: 6566
Re: Fuel Valves
'NC8155 is a '46 24W. It was restored by a guy named Bob Drake & his father. It was an excellent job, but it was obvious they got tired of looking at it at the end of the project. I've detail up a lot of small things & brought it over to Germany, where I live. I was amazed it took 13 days for myself ...
- Wed Jan 30, 2008 12:20 pm
- Forum: Yahoo Group Archives
- Topic: Re: Fuel Valves
- Replies: 22
- Views: 6566
Re: Fuel Valves
'Jim,
In addition to the fuel valves, would you happen to have an original magneto switch?
Thanks,
Steve Whelan
james chybicki wrote:
Hi Steve-
I have a couple sets of New Old Stock Fairchild
original Fuel Valves
If you need one or a set let me know, I have a bunch
of F24W/UC-61 ...
In addition to the fuel valves, would you happen to have an original magneto switch?
Thanks,
Steve Whelan
james chybicki wrote:
Hi Steve-
I have a couple sets of New Old Stock Fairchild
original Fuel Valves
If you need one or a set let me know, I have a bunch
of F24W/UC-61 ...