Fairchild Club Forum

'I have been at SNF for the past 2 years but will be unable to make it
down this year. The Antique BBQ dinner is excellent. There isn't any
structure to the club there but you can pick out the Fairchilds from
the crowd and the pilots aren't usually too far away.'

'When we were working on the gear of mine, we used an engine hoist to
support the load. We used an industrial tie-down webbing wrapped
around the wing struts just above the oleo but we only worked on one
side at a time. Hope this helps.

Regards,
Bradley Bormuth
F24W-40 (NC28640)


--- In ...

'Karl,

I don't know how I missed your first e-mail. Tom covered most of your
questions earlier. I thought I would add my performance specs. I
have a 1940 24W-40 with the Warner 165 with an Aeromatic propeller and
I find that I get between 100 mph TAS in the summer and 115 mph TAS in
the ...

'Hello all,

I am looking for a replacement aileron hinge ball bearing for my
24W-40. Approx. dimensions are .687OD and .250ID by .300. It does
not appear to be a standard bearing and is not carried by Spruce or
Univair. Does anyone have one of these or know where to get one?

Regards ...

'What is the tail wheel tension supposed to be to the tail wheel
assembly? The manual says 51lbs for the rudder but is that the same
for the tail wheel?

Also, I am getting some pretty severe tail wheel shimmy on landing and
everything in the tail wheel assembly seems to be tight - no ...

'I was interviewed my Mike Blakney from AVWeb the other day about my
restoration project and he put our interview up on AVWeb. It is an
audio interview that you can listen to. Enjoy:

http://www.avweb.com/podcast/podcast/AudioPodcast_BradleyBormuth_Fairchi\
ld24Recovery_197888-1.html ...

'Radial Engines Ltd. did a superb job on ours a couple of years back.
They have a website http://www.radialengines.com/

Bradley Bormuth
NC28640 (24W-40)

> Who is doing Warner OH these days?

'

'That is a good checklist for the 145 Warner but I was wondering if
anyone has something similar for the 165 Warner and/or and additional
points of inspection for the airframe especially during the annual.

P.S. - If anyone is still looking for the checklists, they are now in
the files section ...

'I am having a problem with radio interference but only on the
receiving end. It sounds to me like spark noise (lower frequency
noise at maybe an estimated 10 times per second that varies with
engine rpm). As far as I can tell, it has always been there and I was
hoping that it would go away when ...

'Thanks thats good to know.

Bradley

--- In fairchildclub@yahoogroups.com, "Tom Downey" wrote:
>
> Use the data given in the AC 43,13-1b, It is now approved data. and
> send directly to OKC DO NOT try to obtain a PREAPPROVAL. it is no
> longer needed since the FAA approved the AC 43,13-2b ...